Hobbywing XRotor FPV G2 ESC 4in1 65A

8,533

Model: XRotor FPV G2
LiPo Power input: 3S-6S
Cont.Current: 65Ax4
Burst Current: 80Ax4
BEC Output:?5V@?0.6A
Input wires: 12AWG-130mm (Red/Black)
Output Wire: No wires but solder tabs
Connectors: (In/Out) XT60 (w/ Wires Soldered on) /no
Throttle Calibration: Supported
ESC Programming: BLHeliSuite32

Out of stock

SKU: A12683 Category:

Description

The Hobbywing XRotor FPV G2 ESC 4in1 65A is an advanced electronic speed controller designed specifically for use in FPV (First Person View) racing drones. It is a high-performance component that controls the speed and power distribution to the motors of the drone, ensuring smooth and precise control during flight.High performance 32-bit microprocessor with the running frequency of up to 120MHz for excellent performance. The third generation BLHeli_32 code can support up to 128KHz PWM output frequency, which can be compatible with more motors. All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments. The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us). Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power up.

Features:

High-performance 32-bit microprocessor with a running frequency of up to 120MHz for excellent performance.
The third generation BLHeli_32 code can support up to 128KHz PWM output frequency, which can be compatible with more motors.
All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.
The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us), and Multishot (5-25us).
Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power-up.
The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttles. This can be very useful for finding lost crafts.

Package Includes:
1 x Hobbywing XRotor FPV G2 ESC 4in1 65A

Additional information

Weight 0.086 kg
Dimensions 14 × 9 × 3 cm