Microproessor: ESP8266 microcontroller with a 32-bit Tensilica L106 RISC CPU Wireless Connectivity: WiFi 802.11 b/g/n (2.4 GHz) for connecting to local networks and the internet. Relay: 250VAC, 10A Single relay switch (Normally Open) for controlling electrical loads GPIO Pins: GPIO0 and GPIO2 are commonly used for relay control and status indication Serial Communication: UART up to 115200 bps
8-in-1 SoC featuring embedded AI & NPU, High resolution up to 2K Fast boot-up in milliseconds; ultra-low power in microampere Supporting battery-powered, AI & IoT Ecosystems Multiple streams real-time H.265/H.264/JPEG encoding SDK supports free RTOS, IAR, GCC, Arduino IDE
Microcontroller: ESP8266EX, a 32-bit Tensilica L106 RISC processor with integrated Wi-Fi. Wi-Fi Protocol: 802.11 b/g/n (2.4 GHz). Modes: Station (STA), Soft Access Point (AP), and Station + Soft AP. Security: WEP, WPA/WPA2 PSK/Enterprise, WPS. Range: Typically 50 meters indoors and 100 meters in open spaces.
Very low power logging is supported Built-in MCP73831 single cell LiPo charger Current consumption ~20mA (Run) ~80?A (Sleep) ~18?A (Deep Sleep ?? regulator shut down) LEDs Power LiPo charge indicator Serial Tx and Rx Status
Input Voltage (V):3.3V@600mA Processor: Kinetis KL26 Arm? Cortex?-M0+ MCU Maximum Clock Frequency (MHz):48 Flash Memory:128kB SRAM:16kB Dimension:95x38x10 mm Weight:21 gm