1S 3.7V 3A 2MOS BMS Li-ion 18650 Battery Protection Board

49

  1. Charging voltage: 3.7V
  2. Overcharge Detection Voltage: 4.25 ± 0.05V
  3. Overcharge release voltage: 4.23 ± 0.05V
  4. Over discharge detection voltage: 2.45 ± 0.1V
  5. Upper Limit Continuous Current: 5A
SKU: BA1554 Category:

Description

BMS (Battery Management System) – a battery management system that is designed to monitor the status of batteries, control the process of charging/discharging the battery, etc.

This BMS module has protection against short circuits, overcharges and over-discharge. One of the functions of the charge controller is to turn off the power supply for the batteries when the maximum capacity of at least one battery is reached. This BMS controller is designed for more than 30,000 hours of operation. The maximum allowable current is 3A.

If the maximum permissible value of the supply voltage is exceeded, the charge controller activates the “protection” mode. In order to restore the module, it is necessary to re-apply voltage to the input of the BMS board or wait a while until the charge controller automatically disables protection.

Wiring Instructions:
B+     :  Connected to the battery positive.
B-      :  Connected battery negative.
P+     :  For the battery pack output-input positive
P-      :  For the battery pack output-input negative

Features:

  1. Small size designed for a four-cell battery pack.
  2. Simple and  convenient circuit for easy connections
  3. Over-charge/Over-discharge Protection.
  4. Pre-soldered Nickel Strip ready to mount on battery.

Package Includes:

1 x 1S 3A 18650 Lithium Battery Protection Board

Additional information

Weight 0.003 kg
Dimensions 8 × 6 × 1 cm