Description

The 23LCV512-I/SN is a 512kb SPI Serial SRAM with battery backup and SDI interface. The memory is accessed via a simple serial peripheral interface (SPI) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and data out (SO) lines. Access to the device is controlled through a chip select (CS) input. Additionally, SDI (serial dual interface) is supported if application needs faster data rates. This device also supports unlimited reads and writes to the memory array and supports data backup via external battery/coin cell connected to VBAT (pin 7).

Features:

SPI-compatible bus interface ?? 20MHz clock rate, SPI/SDI mode
Low-power CMOS technology
3mA at 3.6V, 20MHz Read current
4?A at +85?C Maximum standby current
Unlimited read and write cycles
Zero write time
32-byte page
Battery-backed SRAM support via Vbat Pin, automatic switchover to Vbat
Sequential mode reads and writes
High reliability

Package Includes:
1 x 23LCV512-I/SN MICROCHIP SRAM, Synchronous SRAM, 512 Kbit, 64K x 8bit, SOIC, 8 Pins, 2.5 V