Description

Raspberry Pi CM4 kit with a 5 inch touch screen all-in-one machine. The PoE pin Gigabit Ethernet port supports 4K output, onboard four-way USB2.0, 5-inch touch screen, etc. The all-in-one kit is convenient for users to use.

Note:

1. Do not plug and unplug any device except USB and HDMI while the baseboard is working.
2. If the fan needs to be replaced, please confirm the fan voltage and then power on.
3. The USB SLAVE interface is used to burn the image and cannot be used as an OTG interface.
4. In normal use, it is necessary to provide at least 5V 2.5A power supply for CM4. Otherwise, there may be problems such as automatic shutdown, frequency reduction and so on.
5. Onboard default 4-way USB 2.0 interface.
6. Support POE pins, additional POE HAT is required if POE function is required.
7. This screen needs to add a driver to work.

Specifications: 

1. Input power: 5V
2. CM4 Socket: suitable for all variants of Compute Module 4
3. Networking: Gigabit Ethernet RJ45 connector
4. M.2 M Key: supports NVME SSD
5. POE: PoE header (additional PoE HAT is required to enable PoE feature)
6. USB: USB 2.0 × 4
7. Display: 5″ screen, 800 × 480 pixels, 5-point capacitive touch
8. Camera Mipi: CSI-2 port × 2 (15pin 1.0mm FPC connector)
9. Video HDMI: supports 4K 30fps output
10. RTC: Real-time clock with battery socket and ability to wake Compute Module 4
11. Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants
12. Fan header: allows speed adjustment and measurement, 5V / 12V
13. Dimensions: 127.7 × 87.45mm

Packages Includes: 

1 x Waveshare 5″ Touch Screen Expansion for Raspberry Pi CM4