Resolution: 8000 steps = 0.25us. UART: 9600 baud rate. Servo pulse range: 0.5ms to 2.5ms. Dimension :?48 x 46 x 14 (LxWxH) mm. 8 channels: Servo-driven independently. Extendable to 16 Channels: Two controllers linked together to drive 16 servos. Optional Position Reporting: User may request the position of an individual servo.
8 sensor pairs spaced 16mm. 12V input power Onboard Mode and a Select button for instant configuration of LSA08 LCD display unit showing 8 sensors analog value with bar chart and line position. Simple Auto-Calibration function to the line following surface. Low current consumption (typically 26mA) Works on glossy or reflective surface Refresh rate up to 200Hz.
Operating Voltage: DC 7 V to 30 V Maximum Motor Current: 10 A continuous, 30 A peak Motor Output PWM Frequency: 20 kHz RC Input Voltage (RC1 & RC2): Low Level: 0-0.7 V | High Level: 1.5-15 V Output Maximum Current: 0-500 mA
Operating Voltage: DC 6V to 30V. Inputs compatible with 1.8V, 3.3V, 5V, and 12V logic . PWM frequency up to 20kHz. Compatible with sign-magnitude and locked-antiphase PWM operation.
Onboard 1A (maximum) 5V voltage regulator. Onboard 500mA (maximum) 3.3V voltage regulator. 0-5V digital outputs with 3.3V compatible inputs. 14 Digital I/O Pins (6 PWM outputs).(4 pin used for Motor driver) 6 Analog Inputs (Can be digital I/O too). Maximum current up to 10A continuous and 30A Peak. ISP 6-pin Header. 32k Flash Memory. 16MHz Clock Speed. R3 Shield Compatible.
Provides a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 1602 white character blue backlight LCD. The keypad consists of 6 keys select, up, right, down, left and reset. To save the digital IO pins, the keypad interface only uses one ADC channel. The key value is read out through a…
Battery low voltage indicator. Battery over voltage indicator. Thermal protection. Current limit protection. Bi-directional control for dual brushed DC motor. Support motor voltage from?7V to 35VDC. Dimension: 103 x 97 x 40 (LxWxH) mm.
Single power operation Dual Channels means it can drive two brush motor independently, or mixed. Support Signed magnitude and Locked Anti-phase in PWM mode. Two manual/test buttons for each channel. Two output indicator LEDs for each channel. Power, Error indicator, RUN status (Left and Right) LEDs On board reset button to restart the MCU after changing operation mode. Operating modes:…
Support motor voltage ranges from? 6V to 30V Maximum current up to 13A continuous and 30A peak (10 seconds). GROVE compatible 3.3V and 5V logic level input. SMD compatible Peak Current (A): 30 (10 seconds) Continuous Current (A): 1 No. of Channels: 1
Program most of the +3.3V or +5V PIC Compatible with PICkit2??s UART Tool and Logic Tool The program most of the current 8-, 16-, and 32-bit Flash PIC microcontroller Compatible with Windows XP, Vista,?7, 8 and 8.1. Compatible with Microchip??s PICkit 2. Powered directly from the USB port. NO EXTERNAL POWER REQUIRED for UIC00B to function. Compatible with PICkit2??s Logic…