No separate logic supply needed; inputs are 3V- and 5V-compatible Under-voltage lockout and protection against over-current/short-circuit and over-temperature Carrier board adds reverse-voltage protection Compact size (0.6??×0.5??)
Inputs compatible with 1.8?V, 3.3?V, and 5?V logic Under-voltage lockout, over-current protection, short circuit protection, and reverse-voltage protection (up to 40?V) High-power: can deliver up to 4?A continuous per phase without extra cooling (6?A max with sufficient additional cooling) Highly configurable through SPI interface Optional STEP/DIR control pins (stepping can also be controlled through SPI interface alone)
Reverse-voltage protection Short circuit protection Current sensing and current limiting functionality Inputs compatible with 1.8?V, 3.3?V, and 5?V logic
built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature simple two-pin speed direction interface Under-voltage lockout and protection against over-current and over-temperature Simple interface requires only two I/O lines (one for direction and another for speed)
Under-voltage lockout on the logic supply and protection against over-temperature Carrier board adds reverse-voltage protection on the motor supply Compact size (0.6??×0.6??) Built-in under-voltage and over-temperature protection
Compatible with 5?V and 3.3?V microcontrollers Integrated 5V regulator that can be used to supply an external microcontroller Integrated watchdog function Open coil detection Thermal warning indicates when the driver is close to the thermal shutdown temperature Over-current status and shutdown (short-to-ground and shorted-load protection) Reverse voltage protection
Product: Radio controlled relay Max relay voltage: 60VDC, 125VAC Max relay current: 1A at 24VDC, 0.5A at 125VAC (60W light-bulb) Relay resistance: 100 mO max Operating voltage: 3.5V to 5.5V
Voltage Max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 34 mΩ Maximum PWM frequency: 10 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown.
32bit 100M Cortex-M3 MCU-LPC 1768 High-performance Support highly modular open source firmware Smoothieware Easy for secondary development ?Support network function, then proceed remote control via IE Explorer.
Support motor voltage ranges from? 6V to 30V Maximum current up to 13A continuous and 30A peak (10 seconds). GROVE compatible 3.3V and 5V logic level input. SMD compatible Peak Current (A): 30 (10 seconds) Continuous Current (A): 1 No. of Channels: 1
MCU: STM32F030F4P6 DC bidirectional motor driver chip RZ7899 External access DC voltage MAX: 12V I2C mailing address Default 0x20 (can be modified by toggle of the encoding switch) Maximum allowable current: 3A
"🎉 Enjoy exclusive discounts! Use coupon codes at checkout & get FREE delivery on eligible orders. Shop now! 🚚✨" Dismiss
