Bidirectional control for one brushed DC motor. Operating Voltage: DC 6V to 30V Maximum Motor Current: 20A continuous, 60A peak Buttons for quick testing. LEDs for motor output state. Overcurrent protection with active current limiting. Temperature protection. Undervoltage shutdown.
Bidirectional control for one brushed DC motor. Maximum Motor Current: 25A continuous, 60A peak. 5V output for the host controller (250mA max). Buttons for quick testing. PWM frequency up to 40kHz. Dual Input Mode: PWM/DIR or Potentiometer/Switch Input.
Single power operation Dual Channels means it can drive two brush motor independently, or mixed. Support Signed magnitude and Locked Anti-phase in PWM mode. Two manual/test buttons for each channel. Two output indicator LEDs for each channel. Power, Error indicator, RUN status (Left and Right) LEDs On board reset button to restart the MCU after changing operation mode. Operating modes:…
Bi-directional control for a single brushed DC motor. Support motor from 7V to 25V. Maximum current up to 80A peak (1 second), 40A (5 minutes) or 30A (> 20 minutes) continuously. 16 KHz switching frequency for quiet operation. Reverse polarity protection. LiPo battery low voltage warning. Thermal protection. Current limiting base on temperature.
Battery low voltage indicator. Battery over voltage indicator. Thermal protection. Current limit protection. Bi-directional control for dual brushed DC motor. Support motor voltage from?7V to 35VDC. Dimension: 103 x 97 x 40 (LxWxH) mm.
Onboard 1A (maximum) 5V voltage regulator. Onboard 500mA (maximum) 3.3V voltage regulator. 0-5V digital outputs with 3.3V compatible inputs. 14 Digital I/O Pins (6 PWM outputs).(4 pin used for Motor driver) 6 Analog Inputs (Can be digital I/O too). Maximum current up to 10A continuous and 30A Peak. ISP 6-pin Header. 32k Flash Memory. 16MHz Clock Speed. R3 Shield Compatible.
Operating Voltage: DC 6V to 30V. Inputs compatible with 1.8V, 3.3V, 5V, and 12V logic . PWM frequency up to 20kHz. Compatible with sign-magnitude and locked-antiphase PWM operation.
Operating Voltage: DC 7 V to 30 V Maximum Motor Current: 10 A continuous, 30 A peak Motor Output PWM Frequency: 20 kHz RC Input Voltage (RC1 & RC2): Low Level: 0-0.7 V | High Level: 1.5-15 V Output Maximum Current: 0-500 mA
Onboard high-quality MP3 decoder. Onboard dual channel/Stereo 3W differential audio amplifier for an external speaker. A MicroSD status LED. Onboard stereo 3.5mm audio jack socket for earphones. Onboard microSD socket for MP3 audio files storage. The interface from Arduino, UART, selectable to use soft serial. Stackable side headers. Supply voltage: 5V.
"🎉 Enjoy exclusive discounts! Use coupon codes at checkout & get FREE delivery on eligible orders. Shop now! 🚚✨" Dismiss
