-
- Add to cart
- Arduino & Shields
Cable for Arduino UNO/MEGA (USB A to B)-1M
- ₹58
- Fully compatible with the PC. Moulded strain relief and PVC over moulding to ensure a lifetime of error-free data transmissions. Aluminum under mould shield helps meet FCC requirements on KMI/RFI interference. Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
-
- Add to cart
- Arduino & Shields, Motor Drivers
L293D Motor Driver Shield
- ₹141
- 2 connections for 5V ?hobby? servos connected to the Arduino?s high-resolution dedicated timer 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution) Up to 2 stepper motors (unipolar or…
-
- Add to cart
- Arduino & Shields, Electronic Components
12V 1A DC Power Supply Adapter for Arduino Uno
- ₹129
- Input - 100-240 VAC 50/60Hz Category - Switch Mode Power Adaptor (SMPS) Output Type - DC Output - 12Volts 1Amp
-
- Add to cart
- Raspberry Pi cases, Arduino & Shields
Transparent Plastic Case for Arduino UNO R3
- ₹69
- Compatible with Arduino Uno Made of high-quality Acrylic, provides good protection To protect your little computer against damages, dust, and scratches Clear Top and Bottom. This case provides easy access to all ports. It requires no tools for easy assembly and disassembly.
-
- Add to cart
- Arduino & Shields
Blue NANO IO Shield V1.0 Simple Expansion Board Finished Board
- ₹160
- Type: Voltage Regulator Supply Voltage: 3 – 5V Compatible with Arduino NANO All digital and analogue pins breakout Compact size Leads all pins out, convenient for wiring and doing experiments.
-
- Add to cart
- Arduino & Shields, IoT
SPI to Ethernet Hardware TCP/IP W5500 Ethernet Network Module
- ₹709
- 10BaseT/100BaseTX Ethernet PHY embedded. Supports automatic response (full duplex/half duplex mode). Supports 8 independent sockets simultaneously. Internal 32Kbytes Memory for Tx/Rx Buffers. Power off mode: support. Network wake: support. SPI interface (SPI MODE 0, 3), convenient connection with MCU.
-
- Out of StockRead more
- Arduino & Shields
Ethernet W5100 R3 Ethernet & SD Shield for Arduino
- ₹847
- Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet. Stackable Design, can directly be supported by Arduino official Ethernet Library. Supports up to four simultaneous socket connections Can be used to store files for serving over the network. Can be accessed using the Mini SD TF library. IEEE802.3af compliant Low output ripple…
-
-
- Add to cart
- Arduino & Shields
Prototype Shield V3.0 For Arduino Mega with breadboard
- ₹194
- The shield can support being fully assembled with Arduino MEGA Support soldering components directly on this shield Support sticking the mini breadboards on this shield Reset button up top Mainboard aureate quadrate With SOP28 SMT components encapsulation
-
- Add to cart
- Arduino & Shields
Arduino Mega 2560 R3 Sensor Shield V2.0
- ₹169
- PCB finest Immersion Gold processing Plug it easier to set up a variety of commonly used module interface
-
- Add to cart
- Arduino & Shields
Transparent Acrylic Case Shell Enclosure Gloss Box For Arduino UNO R3
- ₹49
- For Arduino UNO R3 Development Board only. With screw copper pillar and installation instructions. To protect your little computer against damages, dust and scratches Clear Top and Bottom. This case provides easy access to all ports. It requires no tools for easy assembly and disassembly. Simply Clicks Together Enclosure.
-
- Add to cart
- Arduino & Shields
Proto Shield (Prototype) for Arduino UNO with mini Breadboard
- ₹129
- It has a nice standard 0.1″x0.1″ prototyping grid with big pads Comes with Stacking headers and plain header, choose whichever you want when soldering together An IC pattern for adding DIP ICs up to 20 pins Power rails down the middle and sides A reset button and an extra general use button Two 3mm general use LEDs, red and green,…
-
- Add to cart
- Arduino & Shields, Development Boards
Sensor Shield V5 Expansion Board For Arduino
- ₹149
- Retain the merits of the V4.0 version Laminated design PCB immersion gold processing technology IIC interface Bluetooth module communication interface SD card module communication interface APC220 wireless rf modules communication interface RB URF v1.1 ultrasonic sensors interface 12864 LCD string of line and parallel interface 32 servo controller interface
-
- Add to cart
- Arduino & Shields, Development Boards
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
- ₹739
- Microcontroller: ATmega168 or ATmega328V Operating Voltage: 2.7-5.5 V Digital I/O Pins: 14 PWM Channels: 6 Analog Input Channels: 6 DC Current per I/O Pin: 40 mA Board will run from 2V to 5V. The latest version of the LilyPad supports automatic reset for even easier programming. The back side of the LilyPad is now completely flat!
-
- Add to cart
- Arduino & Shields
Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm
- ₹39
- Up to 480 Mbps data transfer rate. USB Type: Type-A to Mini-B Weight: 15 gm Length: 30 cm Exclusively designed for Arduino Nano boards.
-
- Add to cart
- Arduino & Shields
Nano V3 Ethernet Shield
- ₹725
- Controller: Microchip's ENC28J60 ethernet / HR911105A Works as server or client Comes with efficient library and examples Direct plug puzzle board, NO soldering needed.
-
- Add to cart
- Arduino & Shields
NANO 328P Multi-Purpose Expansion Board
- ₹149
- Compatible with Arduino NANO All digital and analog pins breakout Compact size; External power supply current support Leads all pins out, convenient for wiring and doing experiments.
-
- Add to cart
- Arduino & Shields
L298P Motor Shield motor driver
- ₹689
- L298P based Arduino motor driver shield Onboard Buzzer (D4). Onboard Bluetooth interface, you can directly plug, no wiring required. Six Analog interface. Forward, Backward steering indicators
-
- Add to cart
- Arduino & Shields
USB Host Shield
- ₹1,169
- Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards. Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host) Supports HID devices, such as keyboards, mice, joysticks, etc. Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard drives (FAT32 Type File System ? Mega Arduino only).
-
- Out of StockRead more
- Arduino & Shields
Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino
- ₹1,542
- Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet. Stackable Design, can directly be supported by for Arduino official Ethernet Library. Supports up to four simultaneous socket connections Can be used to store files for serving over the network. Can be accessed using the Mini SD TF library. IEEE802.3af compliant Low output…
-
-
- Add to cart
- Arduino & Shields
ESP8266 WIFI Shield
- ₹559
- 32-bit RISC architecture The processor can operate at 80MHz / 160MHz 32MB flash memory 64kB for instructions 96kB for data Standard native WiFi 802.11b / g / n Operates in AP, Station or AP + Station mode
-
- Add to cart
- Arduino & Shields
Data Logger Shield
- ₹231
- SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card. Real-time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years. Included libraries and example code for both SD and RTC mean you can get going quickly Prototyping area for soldering connectors,…
-
- Add to cart
- Arduino & Shields
UNO R3 acrylic Case
- ₹49
- For Arduino UNO R3 Development Board only. With screw copper pillar and installation instructions. To protect your little computer against damages, dust and scratches Clear Top and Bottom. This case provides easy access to all ports. It requires no tools for easy assembly and disassembly. Simply Clicks Together Enclosure.
-
- Add to cart
- Arduino & Shields
XBEE Shield for Arduino Uno
- ₹350
- Stackable design, easy to plug into the ARDUINO development board. Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly. 3.3v and 5v dual power output. 3.3v and 5v IO compatible. USB2.0 protocol.
-
- Add to cart
- Arduino & Shields, AiThinker ESP WiFi Modules
Wemos D1 R2 WIFI ESP8266 Shield Arduino
- ₹399
- Microcontroller: ESP8266EX Operating Voltage: 3.3V Digital I/O Pins: 11 (all I/O pins have interrupt/PWM/I2C/one-wire capability, except for D0) Analog Input Pins: 1 Flash Memory: 4MB On-Board Switching Power Supply: Input Voltage Range: 9V to 12V Output: 5V at 1A Max