Made of high-quality ABS plastic, provide good protective For Arduino Mega 2560 Development Board only. To protect your little computer against damages, dust, and scratches Clear Top and Bottom. This case provides easy access to all ports. It requires no tools for easy assembly and disassembly.
Implements CAN V2.0B speed up to?1 Mb/s SPI Interface speeds up to 10 MHz Standard (11 bit) and extended (29 bit) data and remote frames Two receive buffers with prioritized message storage Industrial standard DB-9 connector
Latest Arduino CNC Shield Version 3.10 GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) Coolant enable Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping ) Compact design. 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z…
8bits colors support with 6bits correction for each color in every dots Hardware 16MHz PWM support 24 constant current channels of 100mA each Current Consumption(Except LED matrix): 20mA typical (40mA maximum) Drive current(Every channel):?500mA Drive current(Every dot) :?58mA
Onboard high-quality MP3 decoder. Onboard dual channel/Stereo 3W differential audio amplifier for an external speaker. A MicroSD status LED. Onboard stereo 3.5mm audio jack socket for earphones. Onboard microSD socket for MP3 audio files storage. The interface from Arduino, UART, selectable to use soft serial. Stackable side headers. Supply voltage: 5V.
SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card. Real-time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years. Included libraries and example code for both SD and RTC mean you can get going quickly Prototyping area for soldering connectors,…
Chip Type: GP8302 Input Signal Range: 12Bit, 0x000-0xFFF (0-25mA) Input I2C Signal High Level: 2.7V-5V Power Supply: 18V-24V (24V recommended) Accuracy: 0.5% before calibration, 0.2% after calibration
Compatible with Arduino NANO All digital and analog pins breakout Compact size. Leads all pins out, convenient for wiring, and doing experiments. Dimensions: 53 x 36 x 12 (LxWxH) mm. Weight: 22 gm.
Microcontroller: AT91SAM3X8E Operating Voltage: 3.3V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-16V Digital I/O Pins: 54 (of which 12 provide PWM output) Analog Input Pins: 12 Analog Outputs Pins: 2 (DAC) A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. CPU clock at 84Mhz 96KBytes of SRAM
Microcontroller: AT91SAM3X8E Operating Voltage: 3.3V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-16V Digital I/O Pins: 54 (of which 12 provide PWM output) Analog Input Pins: 12 Analog Outputs Pins: 2 (DAC) A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. CPU clock at 84Mhz 96KBytes of SRAM
32-bit RISC architecture The processor can operate at 80MHz / 160MHz 32MB flash memory 64kB for instructions 96kB for data Standard native WiFi 802.11b / g / n Operates in AP, Station or AP + Station mode
Pin compatible with Adafruit Motor Shield Pin header to connect sensors and actuators. 4 H-Bridges L293D chipset. Surg Current Protection for IC L293D. Onboard On/Off Switch. Drive? 4 bi-directional DC motors Drive 2 Servo motors (unipolar or bipolar) On-board slot to connect HC-05/HC-06 Bluetooth modules for Wireless control via Smartphone
2-Axis joystick Bluetooth / Serial interface I2C interface nRF24L01 interface Nokia 5110 LCD interface Interface connector Power switch to switch between 3.3 and 5V
2 connections for 5V ?hobby? servos connected to the Arduino?s high-resolution dedicated timer 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution) Up to 2 stepper motors (unipolar or…
L298P based Arduino motor driver shield Onboard Buzzer (D4). Onboard Bluetooth interface, you can directly plug, no wiring required. Six Analog interface. Forward, Backward steering indicators
SPI Interface up to 10 MHz. Implements CAN V1.2 B at up to 1 Mb/s. Arduino/ Freaduino Completely compatible. Industrial standard 9 pin sub-D connector. Standard (11 bit) and extended (29 bit) data and remote frames.
It is a customized version of the classic ARDUINO MEGA R3 board. Full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board! All components can be set up to work together or independently.
54 Digital I/O terminals (14 of which have programmable PWM outputs). 16 Analog Inputs. 4 UARTs (hardware serial ports). 16 MHz crystal clock. Operating voltage: 6 ~ 12v. Dimensions: 110 x 53 x 15 mm.
Programmer: Atmel ATmega2560 microcontroller. 54 digital input/output terminals (14 of which have programmable PWM outputs). 16 analog inputs. 4 UARTs (hardware serial ports). 16 MHz crystal clock.
It is a customized version of the classic ARDUINO MEGA R3 board. Full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board! All components can be set up to work together or independently.
Family Name: Grove Product Type: Shield Supply Voltage Min: 3.3 V 12-bit ADC converter, compatible with I2C interface I2C bus master controller with UART interface Interfaces GPIO: I?C, UART
