32-bit RISC architecture The processor can operate at 80MHz / 160MHz 32MB flash memory 64kB for instructions 96kB for data Standard native WiFi 802.11b / g / n Operates in AP, Station or AP + Station mode
Pin compatible with Adafruit Motor Shield Pin header to connect sensors and actuators. 4 H-Bridges L293D chipset. Surg Current Protection for IC L293D. Onboard On/Off Switch. Drive? 4 bi-directional DC motors Drive 2 Servo motors (unipolar or bipolar) On-board slot to connect HC-05/HC-06 Bluetooth modules for Wireless control via Smartphone
2-Axis joystick Bluetooth / Serial interface I2C interface nRF24L01 interface Nokia 5110 LCD interface Interface connector Power switch to switch between 3.3 and 5V
2 connections for 5V ?hobby? servos connected to the Arduino?s high-resolution dedicated timer 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution) Up to 2 stepper motors (unipolar or…
L298P based Arduino motor driver shield Onboard Buzzer (D4). Onboard Bluetooth interface, you can directly plug, no wiring required. Six Analog interface. Forward, Backward steering indicators
SPI Interface up to 10 MHz. Implements CAN V1.2 B at up to 1 Mb/s. Arduino/ Freaduino Completely compatible. Industrial standard 9 pin sub-D connector. Standard (11 bit) and extended (29 bit) data and remote frames.
It is a customized version of the classic ARDUINO MEGA R3 board. Full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board! All components can be set up to work together or independently.
54 Digital I/O terminals (14 of which have programmable PWM outputs). 16 Analog Inputs. 4 UARTs (hardware serial ports). 16 MHz crystal clock. Operating voltage: 6 ~ 12v. Dimensions: 110 x 53 x 15 mm.
Programmer: Atmel ATmega2560 microcontroller. 54 digital input/output terminals (14 of which have programmable PWM outputs). 16 analog inputs. 4 UARTs (hardware serial ports). 16 MHz crystal clock.
It is a customized version of the classic ARDUINO MEGA R3 board. Full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board! All components can be set up to work together or independently.
Family Name: Grove Product Type: Shield Supply Voltage Min: 3.3 V 12-bit ADC converter, compatible with I2C interface I2C bus master controller with UART interface Interfaces GPIO: I?C, UART
