Description

This is DFRobot Fermion MEMS Nitrogen Dioxide NO2 Gas Detection Sensor (Breakout, 0.1-10ppm). Fermion: MEMS Nitrogen Dioxide NO2 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (＜20mA), minimal heat generation, short preheating time, and swift response recovery. The sensor can qualitatively measure the concentration of nitrogen dioxide gas, and is suitable for nitrogen dioxide detector, automobile exhaust detection, and other application scenarios.
The MEMS series currently encompasses 11 different types of gas sensors (HCHO, CO, CH4, VOC, NH3, H2S, EtOH, Smoke, Odor, H2, NO2), which can be combined as per specific requirements.
?
Applications:

Air quality monitoring:?measures the level of NO2 and other pollutants in the ambient air.
Automotive emission control:?monitors the NO2 emission from vehicles and adjusts the fuel injection and combustion parameters to reduce the emission.
Industrial safety:?detects the leakage or exposure of NO2 and other toxic gases in industrial processes or workplaces.

?

Note: This sensor is capable of only qualitative measurements. For quantitative measurements, kindly consider purchasing the Gravity: Factory Calibrated Electrochemical CO Sensor (0-1000 ppm, I2C & UART).
?
Precautions for use:

Kindly remove the protective film before usage.
To prevent exposure to volatile silicon compounds vapors (such as silicone adhesive, hair gel, silicone rubber, or other locations where volatile silicon compounds are present).
Avoid exposure to high concentrations of corrosive gases (such as H2S, SOX, Cl2, HCl, etc.).
Prevent contamination from alkalis, alkali metal salts, and halogens.
Refrain from prolonged exposure to extreme environments (such as high temperatures, high humidity, high pollution).
Avoid contact with water, condensation, and freezing.
Minimize excessive vibration, impact, and dropping.
Please refrain from employing this module in systems that involve personal safety concerns.
For extended periods of non-usage, it is advisable to preheat the module for at least 24 hours.

?
For more info., click below.

Product wiki
Schematics & Dimension
Characteristic Parameter
Project:?Building an Electronic Nose with MEMS Gas Detection Sensor Breakout Series and Edge Impulse Platform

Features:

Easy to use.
Compact size, measuring only 13*13*2.5mm
Low power consumption, operating current ＜20mA
High sensitivity and rapid response recovery
Advanced MEMS technology
Gas detected: NO2
Sensitivity: R0(in air)/Rs(in 5ppm NO2) ?? 0.5
Lifespan: ??5 years (in air)
Good quality product

Package Includes:
1 x DFRobot Fermion MEMS Nitrogen Dioxide NO2 Gas Detection Sensor (Breakout, 0.1-10ppm)
1 x 2.54mm pitch header pin