Description

This is Digilent Cmod S7: Breadboardable Spartan-7 FPGA Module.
The Cmod, or Carrier Module, family of products is designed to offer quick, simple, and flexible integration of an FPGA into circuit design, prototyping, and learning/hobby projects.
The Digilent Cmod S7 is a small, 48-pin DIP form factor board, populated with 36 pins, built around a Xilinx? Spartan?-7 FPGA that brings FPGA power and prototyping to a solderless breadboard.
The board includes a Quad-SPI flash for programming, as well as a USB-JTAG programming circuit and USB-UART bridge. The Cmod S7 also features a clock source, Pmod port, and onboard I/O with LEDs and pushbuttons. There are 32 FPGA I/O signals, 2 FPGA analog input signals, an external power input rail, and ground that are routed to 100-mil-spaced through-hole pins, making the Cmod S7 compatible with solderless breadboards. This form factor makes the Cmod S7 a great option for flexible and affordable prototyping, or learning FPGA and digital logic circuits. At just .7?? by 3.05??, it can also be loaded in a standard socket and used in embedded systems.
The Spartan-7 FPGA on the Cmod S7 fits performance into a small form-factor packaging. With the MicroBlaze Soft Processor Core from Xilinx, you can create embedded applications with a variety of peripherals, memory, and interfaces.
If your design requires transceiver lines or more FPGA resources, we recommend the higher-performance Cmod A7, featuring an Artix-7 FPGA.
The Cmod S7 can be programmed with Digilent??s Adept software. Digilent Adept is a unique and powerful solution that allows you to communicate with Digilent system boards and a wide assortment of logic devices. Find out more about Adept here.

Features:

Xilinx Spartan-7 FPGA (XC7S25-1CSGA225C)

3,650 slices containing four 6-input LUTs and 8 flip-flops

1,620 Kbits of fast block RAM

Three clock management tiles, each with a phase-locked loop and mixed-mode clock manager

80 DSP slices

Internal clock speeds exceeding 450 MHz

On-chip analog-to-digital converter (XADC)

Programmable over JTAG and Quad-SPI Flash

Memory

4 MB?Quad-SPI Flash

Power

Powered from USB or 5V external supply connected to DIP pin 24 (micro USB cable?NOT?included)

USB

USB-JTAG programming circuitry

USB-UART bridge

Push-buttons and LEDs

2 Buttons

4 LEDs

1 RGB LED

Expansion Connectors

1 Pmod connector

8 total FPGA I/O

48-pin DIP form-factor headers

36 populated pins

32 total FPGA I/O
2 Single-ended 0-3.3V analog inputs to XADC

Product Compliance:

HTC:?8473301180
ECCN:?EAR99

Package Includes:
1 x Digilent Cmod S7 Breadboardable Spartan-7 FPGA Module