Running current: 20A Output: Continuous 20A, Burst 25A up to 10 Sec. Input Voltage: DC 6-16.8V (2-4S Lipo) BEC: 5V/2A Dimensions (L x W x H): 50 x 25 x 7mm
Full 3K Carbon Fiber airframe featuring 4mm removable arms Removable of arms Black Oxide steel screws Easy grip anodized spacers Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns).
Video Format: NTSC/PAL Light Frequency: 50HZ/60HZ Compress Format: MJPEG Records Frame Rate: 30 Frames Max Support: 32G TF Card Video Output Size: VGA(640 x 480px)D1(720 x 480)HD(1280 x 480)
The advanced 32-bit ARM CortexM4 high-performance processors can run NuttX RTOS real-time operating system. 14 PWM / servo output. Bus interface (UART, I2C, SPI, CAN). The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe. Provide automatic and manual modes. Provide redundant power input and failover. Multicolor LED lights. Provide multi-tone…
Support the input channels: 8 Output: PPM SUM × 1 / MUX × 1 Dimensions: 28 x 19 x 5 mm OR 23 x 16 X 7 Weight: 12 gm. (containing all the input and output wires)
Brand: Orange Material: Glass Fiber Nylon Color: Grey No. of Blades: 2 The Orange HD Propellers 1245(12X4.5) Glass Fiber Nylon Gray comes with Epoxy resin cover. Very strong and lightweight.
Optical flow processing at 4×4 binned image at 120 (indoor) to 250 Hz (outdoor). Superior light sensitivity with 24×24 μm super-pixels. Onboard sonar input and mount for Maxbotix sonar sensors. PX4 Flow comes with the sonar already mounted and installed. USB bootloader. Onboard 16bit gyroscope up to 2000?/s and 780 Hz update rate.
Input: 2-5S input Maximum input 6S (close brake) 32bit architecture Telemetry capability (voltage, current, temperature, speed) All inputs and outputs are protected against overvoltage (~30V) and under voltage (~-30V). 3,3 and 5V capable Supports all common Dshot commands like Turtle Mode, 3D mode and change of rotation Overcurrent protection (measures the current and reduces it to max. 40A)
Dimensions: 37 x 37 x 10 mm(L x H x W) Weight: 12 gm. SPI Gyro MPU6000 MicroSD Blackbox F4 Processor (F405) 5v3a SBEC Built-in Current Sensor On-Board OSD (controlled by Beta flight, FC over SPI bus) On-Board Video Filter (only can supply 5V to VTX and Camera) On-Board Voltage Regulator and Power supply (BEC)
Cable Length: 15cm. NZ GPS Suitable for Flight Controller NAZE 32, Interface 1 Pin??2.54. This GPS is customized for the Naze32 flight controller. Internal Ublox 7 series chip core of manufacture OEM.
Direct plug design, Works with most USB port and USB extension cable ?Low power consumption design Onboard 2×3 Pin AVR ISP port ?3pin servo connector can be used as servo or C2 connection Supports SIMONK and BLHELI ESC,?KKflashtool compatible KKflashtool and RapidFlash?compatible
Modulation type: GFSK DSC port: PPM/I-BUS/S.BUS Antenna length: 26mm(not including brass contacts) Power input: 4.0-8.4V No ground interference( transmitting and receiving 1m from the ground):?＞300m Operating current:40mA Channel delay: ＜15ms
Pack contains quality products All products are tested and ready to perform All essential equipment required to build a Racing Drone is included in this advanced combo pack.
ATmega328P with Arduino bootloader. MAX7456 monochrome on-screen display. +5V 500mA regulator for up to +12V supply input. FTDI cable compatible pinout. The standard 6-pin ISP header. Standalone, or with APM/ Flip / Flip32+ flight controllers.
"🎉 Enjoy exclusive discounts! Use coupon codes at checkout & get FREE delivery on eligible orders. Shop now! 🚚✨" Dismiss
