-
- Out of StockRead more
- Flight Controller & Accessories
Micro Minim OSD For Racing F3 Naze32 Flight Controller RC Drone
- ₹649
- ATmega328P with Arduino bootloader. MAX7456 monochrome on-screen display. +5V 500mA regulator for up to +12V supply input. FTDI cable compatible pinout. The standard 6-pin ISP header. Standalone, or with APM/ Flip / Flip32+ flight controllers.
-
-
-
-
-
-
- Out of StockRead more
- Drone Accessories
Matek MICRO BEC 5V/12V-ADJ
- ₹585
- Power Supply: 7-21V Used in Most of the Quadcopter RC Drone Its efficiency is about 95% Used in Overheat Protection
-
-
-
-
-
- Out of StockRead more
- Flight Controller & Accessories
Matek Mateksys FC F411-WTE Compact Flight Controller
- ₹4,649
- MCU: 100MHz STM32F411CEU6 IMU: MPU6000 (SPI) Continuous current: 3.5 Amps Input voltage range: 6~30V Compatible lipo: (2~6S LiPo)
-
-
-
-
- Out of StockRead more
- Flight Controller & Accessories
Matek Mateksys FC F411-WTE Compact Flight Controller
- ₹4,649
- MCU: 100MHz STM32F411CEU6 IMU: MPU6000 (SPI) Continuous current: 3.5 Amps Input voltage range: 6~30V Compatible lipo: (2~6S LiPo)
-
-
-
-
- Out of StockRead more
- Drone Frame and Accessories
MARTIAN-III REPTILE 260mm Quadcopter Frame Kit
- ₹1,690
- Model: Martian-III Material: Carbon Fiber Wheelbase: 260 mm Arm Thickness: 4 mm Weight: 130 gm
-
-
-
-
-
-
-
- Out of StockRead more
- Drone Frame and Accessories
MARTIAN-III REPTILE 220mm Quadcopter Frame Kit
- ₹1,590
- Model: Martian-III Material: Carbon Fiber Wheelbase: 220 mm Arm Thickness: 4 mm Weight: 130 gm
-
-
-
-
-
- Out of StockRead more
- Drone Kit
Mark4 7inch 295mm Carbon Fiber Frame Kit
- ₹2,329
- Model: MARK4 Wheelbase: 295mm Material: Full Carbon Fiber Arm Thickness:5 mm Weight: 150 gm
-
-
-
-
-
- Out of StockRead more
- Drone Kit
Mark4 6 Inch 260mm Carbon Fiber Racing Frame Kit
- ₹2,199
- Model: MARK4 Wheelbase: 250mm Material: Full Carbon Fiber Arm Thickness:5 mm Weight: 160 gm
-
-
-
-
-
- Out of StockRead more
- Flight Controller & Accessories
Mamba F4 pro V2 flight controller
- ₹2,892
- Model: Mamba F4 pro V2 Input voltage: 2 ?? 6s LiPo support Gyroscope: MPU6000 (reserved external gyroscope interface) Firmware: BetaFlihgt 3.2.0 OMNIBUSF4SD Support Receiver: PPM, SBUS, IBUS, DSM2/DSMX Receiver (UART1) Integrated with OSD, support BF Ground Station adjust OSD Adjust the PID by OSD by remote control
-
-
-
-
-
- Out of StockRead more
- GPS Modules
M5Stack Atom Gps Kit (M8030-Kt)
- ₹3,369
- Output protocol: NMEA-0183 NMEA sentence: RMC, VTG, GGA, GSA, GSV, GLL Frequency accuracy: GPS L1, GLONASS L1, BDS B1, GALILEO E1, SBAS L1, QZSS L1 BDS / GPS / GLONASS / Galileo / SBAS / QZSS multiple satellite navigation systems
-
-
-
-
-
-
-
- Out of StockRead more
- Flight Controller & Accessories
Kakute F4 Flight Controller
- ₹2,019
- MCU: STM32F405RGT6?32-bit processor IMU: ICM20689 (SPI) USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART) 3 hardware UARTS (UART1,3,6) 128 Mbit Dataflash chip for Blackbox logging 5v Power Out: 1.5 A max 3.3v Power Out: 200 mA max
-
-
-
-
-
- Out of StockRead more
- Flight Controller & Accessories
Jiyi K3 Apro Flight Controller Kit
- ₹34,234
- Eight rotors: (+ type, X type, V type) Supported ESC type: PWM ESC below 490HZ Maximum output channel: 8 channels Recommended remote control type: SBUS receiver
-
-
-