10.1-inch LCD display. 1200 x 800 screen resolution and IPS display panel. 170? viewing angle Toughened glass capacitive touch panel, 6H hardness. HDMI interface for displaying, USB interface for touch control. Supports 5-level backlight adjustment. Raspberry Pi and Windows device & system support.
Operating voltage: 3.3V/5V Interface: 3-wire SPI, 4-wire SPI Dot pitch: 0.181 × 0.181 No backlight keeps displaying last content for a long time even when power down Ultra-low power consumption, basically power is only required for refreshing SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc.
Display?Resolution: 200 x 200 Display Screen Color: Black and White No backlight so keeps displaying last content for a long time even when the power is down Ultra low power consumption, basically power is only required for refreshing SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
Operating voltage: 3.3V?/ 5V Interface: 3-wire SPI, 4-wire SPI Outline dimension: 42mm × 27mm Display size: 21.76mm × 14mm Dot pitch: 0.175 × 0.17 Resolution: 128 × 80 Display color: black, white No backlight keeps displaying last content for a long time even when power down Ultra-low power consumption, basically power is only required for refreshing SPI control interface, for…
Support Hardwired TCP/IP Protocols: TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE, Ethernet 10BaseT/100BaseTX Ethernet PHY embedded Auto-Negotiation (Full-duplex and half duplex) Support Auto MDI/MDIX Simultaneously Supports to 4 independent sockets 0.18 ?m CMOS technology 3.3V operation with 5V I/O signal tolerance Provide Serial Peripheral Interface (SPI MODE 0, 3) support
Data can be saved as TXT or Excel Supports CAN bus detection for status checking Sending/receiving CAN data with time scale, allows sequentially displaying Baud rate of USB virtual COM port is configurable in the range of 9600 ~ 2000000bps (2000000bps by default) Supports setting working parameters by configuration software or serial command, can be saved after power off Adopts…
