4 MB Flash & 2 MB PSRAM Same size, form factor, and pin-out as Seeed Xiao Can be used with Arduino IDE or CircuitPython 2.4 GHz Wi-Fi System-on-Chip (SoC) 3.3V regulator with 600mA peak output
Derived from ESP8266, ESP8285 has a flash memory of 1MB Operating Voltage: 3.3V Totally compatible with ESP8266 WiFi support 802.11 b/g/n/e/i High temperature resistant, working temperature: -40??-125??
Model: ESP WROOM 32 MCU Processor: Single or Dual core Tensilica Xtensa 32-bit LX6 Operating voltage (v): 2.3 ~ 3.6 Operating current (mA): 80 Small volume, easily embedded to other products Strong function with support LWIP Protocol, Freertos
Flash LED off: 180mA @ 5V. Flash LED on to maximum brightness: 310mA @ 5V. Deep-sleep: 6mA @ 5V min. Modem-sleep: 20mA @ 5V min. Light-sleep: 6.7mA @ 5V min.
Three modes: AP, STA, and AP+STA Support for Lua program, easy to develop 2.4 GHz dual-mode WiFi and Bluetooth Pre-integrated with antenna and RF balun
LDR Light Sensor on board WS2812 Led on board Includes CH340G USB-to-UART programmer Includes LDR (light dependent resistor a.k.a photoresistor) connected to ESP??s ADC pin Supports 3 modes: AP,STA,AP+STA Dimensions: 24mm x 16mm Micro USB connection for power and/or programming
ESP32-D0WD core Supports?multiple external QSPI flash and SRAM chips 32Mbits 3.3V SPI flash 802.11 b/g/n (802.11n up to 150Mbps) Wi-Fi protocol Bluetooth v4.2 BR/EDR and BLE SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, and IR module interfaces Hall sensor
Xtensa 32-bit LX6 microprocessors 1 Kbit of EFUSE, 256 bits MAC WiFi: 802.11 b/g/n/d/e/i/k/r (802.11n up to 150 Mbps) Bluetooth v4.2 BR/EDR and BLE specification Wi-Fi mode Station/softAP/SoftAP+station/P2P Operating voltate: 2.2-3.6V
Features Espressif System??s ESP8266 WROOM-02 Wi-Fi module (with 4Mb flash) Design for IoT with free espert.io cloud and app service Support the Arduino IDE (boards manager) and libraries Auto program loading from Arduino IDE, using UC00A (or other compatible USB to Serial) Onboard 3.3V Voltage Regulator with the maximum current of 800mA continuous, 1A peak One Reset button, two User…
Features Espressif System’s ESP8266 WROOM-02 Wi-Fi module (with 4Mb flash) Design for IoT with free espert.io cloud and app service Support the Arduino IDE (boards manager) and libraries Auto program loading from Arduino IDE, using UC00A (or other compatible USB to Serial) Onboard 3.3V Voltage Regulator with the maximum current of 800mA continuous, 1A peak One Reset button, two User…
Includes MOD-WIFI-ESP8266-DEV Relay 10A/250VAC (15A/120VAC 15A/24VDC) with connector and status LED Big button for easier access to UART mode LiPo battery connector with built-in LiPo charger and status LEDs Step up converter Power jack?for +5V external power supply UEXT connector 20-pin connector CON1 with ESP8266??s signals PCB dimensions: (2.0 x 2.2)?? ~ (51 x 57)mm
Includes MOD-WIFI-ESP8266-DEV Relay 220VAC/10A with connector and status LED Big button for easier access to UART mode Power jack?for +5V external power supply UEXT connector The row of 16 pinholes at 0.1?? step with all ESP8266 signals accessible; male-male 16-pin connector included 4 mounting holes
RTL8188cus Chipset Mini portable USB 2.0 design. Wireless N speed up to 150Mbps, ideal for internet surfing and online gaming. Complies with IEEE 802.11n (Draft 2.0), IEEE 802.11g, IEEE 802.11b standards. MIMO technology makes wireless transmission rates up to 600Mbps wifi antenna. 600Mbps Wireless Wifi USB Dongle/Wireless USB Adapter/Wireless Network Card
The smallest 802.11b/g/n Wi-Fi SoC module Uses low power 32bit CPU and compatible with the application processor Main frequency up to 160MHz Built-in 10Bit high precision ADC Support UART/GPIO/PWM/ADC interface Integrate Wi-Fi MAC/BB/RF/PA/LNA
2G/3G/4G network connection, global band Nano SIM card slot 3x LED indicators 360? Rotating and 90?Bending LTE Antenna connector Features up to 150Mbps Downlink rate and 50Mbps Uplink rate
Operation and charging are possible at the same time. 18650 charging circuit including the 5V boosting circuit with TP5410. Overcharge protection, over-discharge protection built-in. One AD inputs. Micro USB inputs. The five buttons are controlled by FLATH, RSET, D5, D6, and D7 respectively.
