Voltage supply: 3-5V (Battery) / 5V(USB Type C) Voltage output: EN 3V3 / 5V Power output Up to +20.8dBm at 3.3V Frequency: 865 Protocol: LoRaWAN Sensitivity: -116.5dBm ~ -136dBm
Model: RFM69HCW Frequency:868MHz Power Output Capability:+20 dBm 100 mW Sensitivity:-120 dBm at 1.2 kbps Selectivity:16-tap FIR Channel Filter FSK Bit rates:1.2kbps to 300kbps Voltage range:1.8V to 3.6V Module Size:16X16mm
Using RFM95 module based on SX1276 LoRa® Communication Interface: UART Simple wire antenna or MHF Connector for external high gain antenna +20dBm – 100 mW Power Output Capability
Using RFM95 module based on SX1276 LoRa® ~28mA(Avg) @+20dBm continuous transmit ~8.4mA(Avg)@standby mode ~20mA(Avg) @receive mode, BW-500kHz Simple wire antenna or MHF Connector for external high gain antenna +20dBm – 100 mW Power Output Capability
Compatible with 3.3v or 5v I/O Arduino Board. Frequency Band: 915MHz/868 MHZ/433 MHZ (Pre-configure in a factory) Low power consumption Compatible with Arduino Leonardo, Uno, Mega, DUE External Antenna via I-Pex connector
168 dB maximum link budget. +20 dBm – 100 mW constant RF output vs. +14 dBm high-efficiency PA. Programmable bit rate up to 300 kbps. High sensitivity: down to -148 dBm. Bullet-proof front end: IIP3 = -12.5 dBm. Excellent blocking immunity. Low RX current of 10.3 mA, 200 nA register retention. Fully integrated synthesizer with a resolution of 61 Hz.…
Compatible with 3.3v or 5v I/O Arduino Board. Frequency Band: 433 MHZ (Pre-configure in factory) Low power consumption Compatible with Arduino Leonardo, Uno, Mega2560, DUE External Antenna via SMA Jack
