MakerBase MKS A4988 Stepper Motor Driver Module
₹211
Operating Voltage: 8V to 35V
Continuous Current Per Phase: 1A ?? 2A (Max with Heat Sink)
Logic Voltage: 3V to 5.5V
Microstep Resolutions: Full; 1/2; 1/4; 1/8; 1/16
Heat Sink: Included (With Adhesive Thermal Backing)
Protection: Overcurrent, Under-Voltage Lockout, Automatic Chopping Control
Dimensions: 15 x 20mm
Out of stock
Description
The A4988 Stepper Motor Driver Module was designed as a Breakout Board, capable of controlling a four, six or eight-wire Stepper Motor at five different microstep resolutions. It can operate at up to 2A and between 8 to 35V with a heat sink, and includes overcurrent protection, an under-voltage lockout as well as cross-current interference protection. This allows it to operate in conjunction with other parts and components in a system, or as an individual controller reacting to commands from a user or a separate system.
Features:
Low RDS(ON) outputs
Automatic current decay mode detection/selection
?Mixed and Slow current decay modes
Synchronous rectification for low power dissipation
?Internal UVLO
Crossover-current protection
3.3 and 5 V compatible logic supply
?Thermal shutdown circuitry
Short-to-ground protection
Package Includes:
1 x MakerBase MKS A4988 Stepper Motor Driver Module
Additional information
| Weight | 0.005 kg |
|---|---|
| Dimensions | 8 × 7 × 1.5 cm |
| Model Type | A4988 |
| Compatibility | MKS Control Boards, Stepper Motors |
| Voltage Rating (V): | 8 to 35 |
| Current Rating (A) | 1 to 2 |
| Operating Voltage (V) | 8V to 35V |
| Continuous Current (A) | 1A ?? 2A |
| Logic Voltage (V) | 3V to 5.5V |
| Length (mm): | 20 |
| Width (mm): | 15 |
| Height (mm): | 12 |
| Weight (g): | 3 (each) |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 8 × 7 × 1.5 cm |
