Description

The OpenMV Cam H7 R2 is a small, low-power, microcontroller board that allows you to easily implement applications using machine vision in the real world. You program the OpenMV Cam in high-level Python scripts (courtesy of the MicroPython Operating System) instead of C/C++.
This makes it easier to deal with the complex outputs of machine vision algorithms and work with high-level data structures. But, you still have total control over your OpenMV Cam and its I/O pins in Python. You can easily trigger taking pictures and videos of external events or execute machine vision algorithms to figure out how to control your I/O pins.
Applications

Home automation.
Robot guidance.
Industrial Applications.
Surveillance Applications.
Object detection and tracking.

Features:

The STM32H743VI ARM Cortex M7 processor runs at 480 MHz with 1MB SRAM and 2MB of flash. All I/O pins output 3.3V and are 5V tolerant. The processor?has the following I/O interfaces:
A full-speed USB (12Mbs) interface to your computer. Your OpenMV Cam will appear as a Virtual COM Port and a USB Flash Drive when plugged in.
A?μSD Card socket capable of 100Mbs reads/writes which allows your OpenMV Cam to?take pictures and?easily?pull machine vision assets off of the μSD card.
An SPI bus that can run up to 80Mbs allows you to easily stream image data of the system to either the LCD Shield, the WiFi Shield, or another microcontroller
An I2C Bus (up to 1Mb/s), CAN Bus (up to 1Mb/s), and an Asynchronous Serial Bus (TX/RX, up to 7.5Mb/s) for interfacing with other microcontrollers and sensors.

A 12-bit ADC and a 12-bit DAC.
Three I/O pins for servo control.
Interrupts and PWM on all I/O pins (there are 10?I/O pins on the board).
And, an RGB LED and two high-power 850nm IR LEDs.

A removable camera module system allows the OpenMV Cam H7 to interface with different sensors:

Package Includes:
1 x OpenMV Cam H7 R2