Description

If you want to build a project where the machine can control the speed of the conveyer belt as well as the direction of movement, a rotary encoder is a must-have component. Keeping this in mind, Robu. is introducing the brand new orange 1000 PPR AB 2-Phase Incremental?Optical Rotary Encoder?at a competitive price.
A rotary encoder is a type of position sensor which is used for determining the angular position of a rotating shaft. It generates an electrical signal, either analog or digital, according to the rotational movement.
Orange 1000 PPR AB Incremental Optical Rotary Encoder is a hi-resolution optical encoder with quadrature outputs for increment counting. It will give 4000 transitions per rotation between outputs A and B. A quadrature decoder is required to convert the pulses to an up count. The Encoder is built to Industrial grade.

The Encoder comes with a Standard 1.5 m cable length which can be extended with extra cable if needed.

Consider Adding Pull up resistor to both the A and B phases of the encoder output to avoid the effect of interference in output and get the precise logical output value from the encoder. Also adding a pull-up resistor to all phase output lines protects the open collector output-triode from damage due to direct Vcc supply short circuit.
Note: A sample tutorial code has been given in the Description.

Power and Input Terminal Assignments:

Terminal Name
Wire Color
Description

Phase A
White
Quadrature encoded output A

Phase B
Green
Quadrature encoded output B

VCC
Red
VCC should be connected to +ve 5V of supply

GND
Black
The ground should be connected to the negative supply

Shield
Golden
The shield should be connected to GND

Shielding is important. At the minimum, the cable should be protected either by a foil jacket with a drain wire or by a braided-wire shield that is grounded. For very sensitive applications or high-EMI environments, foil jacketed wires in combination with an overall braided-wire shield around the cable should be used to avoid interference and precise encoder output.
To Explore More Rotary Encoders,?Click here

Features :

High cost-efficient advantages.
Incremental rotary encoder internal adopts ASIC devices
High reliability, long life
Anti-jamming performance
Small size, lightweight, compact structure
Easy installation
Stainless steel shaft, High resolution, High quality, line interface with waterproof protection

Useful Link:

Tutorial Code:

//these pins can not be changed 2/3 are special pins
int encoderPin1 = 2;
int encoderPin2 = 3;

volatile int lastEncoded = 0;
volatile long encoderValue = 0;

long lastencoderValue = 0;

int lastMSB = 0;
int lastLSB = 0;

void setup() {
Serial.begin (9600);

pinMode(encoderPin1, INPUT);
pinMode(encoderPin2, INPUT);

digitalWrite(encoderPin1, HIGH); //turn pullup resistor on
digitalWrite(encoderPin2, HIGH); //turn pullup resistor on

//call updateEncoder() when any high/low changed seen
//on interrupt 0 (pin 2), or interrupt 1 (pin 3)
attachInterrupt(0, updateEncoder, CHANGE);
attachInterrupt(1, updateEncoder, CHANGE);

}

void loop(){
//Do stuff here

Serial.println(encoderValue);
delay(1000); //just here to slow down the output, and show it will work even during a delay
}

void updateEncoder(){
int MSB = digitalRead(encoderPin1); //MSB = most significant bit
int LSB = digitalRead(encoderPin2); //LSB = least significant bit

int encoded = (MSB << 1) |LSB; //converting the 2 pin value to single number int sum = (lastEncoded << 2) | encoded; //adding it to the previous encoded value if(sum == 0b1101 || sum == 0b0100 || sum == 0b0010 || sum == 0b1011) encoderValue ++; if(sum == 0b1110 || sum == 0b0111 || sum == 0b0001 || sum == 0b1000) encoderValue --; lastEncoded = encoded; //store this value for next time } Package Includes : 1 x Orange 1000 PPR AB 2-Phase Incremental Optical Rotary Encoder 4 x 4.7K? Resistors for?pull-ups 1 x Mounting Screw Set