Plusivo CL201-D Digital Clamp Meter T-RMS 3999 Counts

2,595

AC current range: 0.1A to 600A
Maximum input voltage: 600V
Model D has a 3 and 3/4-digit LCD (3999 counts)
Continuity: When the resistance value is less than 50 Ω, the buzzer turns on
Autoranging
600 V input voltage protection
Auto Power-OFF
HOLD function/Back Light
Over load indication: ??OL?? symbol displayed when exceeding the measuring range
Low battery indication

Out of stock

SKU: A08126 Category:

Description

This is Plusivo CL201-A Digital Clamp Meter T-RMS 1999 Counts. It??s RMS Autoranging Multi-Function Clampmeter with 3 and 3/4 digit LCD (3999 Counts): Easy to use/operate; accurately measure AC current, AC and DC voltage, resistance. Can also do continuity, frequency, capacitance, temperature, and diode tests.
Plusivo CL201-D Digital Clamp Meter T-RMS 3999 Counts:?

NCV or Non-Contact Voltage Detector: Detect the presence of voltage in an electrical circuit or equipment without touching the wires, red LED will flash quickly when an excess electric field is detected, NCV sensor is at the right upper area of the clamp.
Hold / Backlight (BL) Key: Press once to freeze or retain the display reading. Long press to activate the backlight.
FUNC Key: Press the ??FUNC?? key to switch between the different measurements such as between diode and continuity.
Digital Display with Back Light: ??OL?? displayed when exceeding the measuring range or if test probes are connected in reverse polarity.
Clamp Jaw Opening Distance: The Jaw is marked with maximum current or voltage value making it safer and easier to use. The design is suitable for one-hand operation.
NCV Function: The red LED at the top right of the panel flashes quickly when an excess electric field is detected.
Heat shrink tubes: can test electrical circuit or equipment without touching it. ??EF?? is shown when there is no measurement. display changes from ??-?? to ????-?? depending on the strength of the electric field.
With Accessories: Test probes, various types of test leads, crocodile clips, mini wire stripper tool, etc, has LCD display with backlight, data hold function, low battery detector, overload protection, auto power OFF after 15 minutes of inactivity.

Features:

Model D has a 3 and 3/4 digit LCD (3999 counts)
Continuity: When the resistance value is less than 50 Ω, the buzzer turns on
Autoranging
600 V input voltage protection
Auto Power-OFF
HOLD function/Back Light
Over load indication: ??OL?? symbol displayed when exceeding the measuring range
Low battery indication

Package Includes:
1 x Plusivo CL201-D Digital Clamp Meter T-RMS 3999 Counts

Additional information

Weight 0.55 kg
Dimensions 21 × 11 × 7 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.