Sensor: IMX477 Resolution: 4056(H) x 3040(V) 12.3MP Pixel Size: 1.55um x 1.55um IR Sensitivity: Onboard motorized IR cut filter, support both day and night vision Interface: 4-lane MIPI CSI-2
Sensor Model: IMX477 Sensor resolution:?4056 x 3040 pixels, 12.3MP Model No:?M23390H08 Focal Length: 3.9mm Aperture: F2.8 Focus motor controlled via camera I2C. No hardware modification is required. The automated focus control: Autofocus with OpenCV examples The intuitive focus control: Fine-tune the focus with keyboard arrow keys.
Same size, form factor, and pinout as a classic Trinket Updating ATtiny85 8-bit AVR for ATSAMD21E18 32-bit Cortex M0+ 256KB Flash??? 32x as much as 8 KB on ATtiny85 32 KB RAM??? 64x as much as 512 bytes on ATtiny85 48 MHz 32-bit processor ?? 6x as fast as ATtiny85 (not even taking into account 32-bit speedups) Native USB supported…
5V logic with 3.3V compatible inputs can be converted to a 3.3V logic operation 32KB Flash Memory ?? 0.5K for bootloader Four indicator LEDs Easy reprogramming 31.5KB available after bootloading 16MHz Clock Speed
ARM Cortex M4F (with HW floating point acceleration) running at 64MHz 1MB flash and 256KB SRAM Native Open Source USB stack??? pre-programmed with UF2 bootloader Bluetooth Low Energy compatible 2.4GHz radio FCC / IC / TELEC certified module
ATSAME51 32-bit Cortex M4 core with 120 MH 32-bit, 3.3 V logic and power 512 KB Flash, 192 KB RAM 2 MB SPI FLASH chip 3.3V regulator with 500mA peak current output USB Type-C
ATSAMD21G18 @ 48MHz with 3.3V logic/power 256KB of FLASH + 32KB of RAM 32.768 KHz crystal for clock generation & RTC 3.3V regulator with 500mA peak current output Comes with a USB bootloader and serial port debugging
ATSAMD21G18 @ 48MHz with 3.3V logic/power 256KB of FLASH + 32KB of RAM 3.3V regulator with 500mA peak current output USB bootloader and serial port debugging Built-in 100mA lipoly charger with charging status indicator LED
ATSAMD21G18 @ 48MHz with 3.3V logic/power 256KB of FLASH + 32KB of RAM 3.3V regulator with 500mA peak current output USB bootloader and serial port debugging Built-in 100mA lipoly charger with charging status indicator LED
Model: Adafruit Feather 32u4 Bluefruit LE Light as a (large?) feather ?? 5.7 grams ATmega32u4 @ 8MHz with 3.3V logic/power 3.3V regulator with 500mA peak current output
ATmega328p @ 8MHz with 3.3V logic/power 3.3V regulator with 500mA peak current output USB serial converter (CP2104) USB bootloader and serial port debugging Hardware I2C, hardware SPI support
Model: Adafruit Assembled Data Logging shield SD card interface: FAT16 or FAT32 Onboard regulator: 3.3 V Real time clock (RTC) keeps the time going even when the Arduino is unplugged
Intel? Pentium? N4200/ Celeron? N3350 Processor SoC Onboard 2GB LPDDR4 Memory Onboard 32GB eMMC Storage Gigabit LAN x 2, USB 2.0 x 2, USB 3.0 (Type A) x 3 5V DC-in, 4-6A 40 pin GPIO x 1 DP/eDP/HDMI x 1 MIPI-CSI (4-Lane & 2-Lane) x 1
Intel? Pentium? N4200/ Celeron? N3350/ Atom E3950 ?? Processor SoC Onboard LPDDR4 4GB Memory Onboard eMMC 32GB Storage Gigabit LAN x 1, HDMI x 1, USB 3.2 Gen 1 (Type A) x 3 12V DC-in, 5A 40 pin GPIO x 1 6 pin wafer for Audio x 1
RGB Backlight Keys Onboard trackpad with all mouse function Left+Right click Gaming keys Operate on inbuilt Rechargeable battery Navigation, Volume Rockers and Home key Portable Pocket Size Plug and Play operation, No drivers needed to install Compatible with all Devices and operating Systems
Object detection?based on colors and shapes Easily performs complex functions like?visual picking?with new blocks in Niryo One Studio??s Blockly interface Overall range of vision thanks to the?Wrist Vision Module
"🎉 Enjoy exclusive discounts! Use coupon codes at checkout & get FREE delivery on eligible orders. Shop now! 🚚✨" Dismiss
