Description

global shutter 1280×800 resolution OV9281 camera module is mainly designed for Raspberry Pi boards, and it can be connected directly to RPi??s CSI-2 camera interface without additional hardware. One adapter board can connect?FOUR cameras?on a single Raspberry Pi board, and includes support for the High-Quality Camera
The sensor??s global shutter and excellent low-light sensitivity allow it to be used for any application that needs gesture detection, head, and eye tracking, and depth and motion detection. With this capability, device manufacturers can implement a monochrome or NIR camera device and reduce memory use by using the Y8 stream format. A monochrome camera can serve as the underlying physical camera of a logical multi-camera device to achieve better low-light noise characteristics? The Raspberry Pi Camera Module 2 replaced the original Camera Module in April 2016. The v2 Camera Module has a Sony IMX219 8-megapixel sensor (compared to the 5-megapixel OmniVision OV5647 sensor of the original camera). The Camera Module 2 can be used to take high-definition video, as well as stills photographs.

Useful link:
To use this camera, please follow this tutorial for hardware and software setup.

Applications:

Security
High dynamic range imaging
Unattended surveillance
Stereo vision
Machine vision
Automation

Features:?

Sensor: Monochrome global shutter OV9281
Pixel Size: 3 μm x 3 μm
Active array size: 1280 x 800
Optical Size: 1/4 inch
Focusing Range:?65mm ~ infinite
IR Sensitive:?Visible light only, build-in 650nm IR cut filter
Output interface:?1-lane MIPI serial output with Arducam SDK.
Output formats: RAW 8/10
Maximum image transfer rate: 1280 x?800@120?fps with the Official driver/Arducam SDK.
Board Size: 40mm x 40mm
Lens Specs: FoV ?? 166?(D), EFL ?? 0.83mm, F.NO ?? 2.0

Package Includes:
1 x Waveshare OV9281-120 Mono Camera for Raspberry Pi, Global Shutter, 1MP