WIZnet W5100S-EVB-Pico
₹1,297
RP2040 microcontroller with 2MByte Flash
Dual-core cortex M0+ at up to 133MHz
264kByte multi-bank high-performance SRAM
30 multi-function General Purpose IO (4 can be used for ADC)
1.8-3.3V IO Voltage (NOTE. Pico IO voltage is fixed at 3.3V)
12-bit 500ksps Analogue to Digital Converter (ADC)
Out of stock
Description
W5100S-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and entirely hardwired TCP/IP controller W5100S ?? and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5100S.
WIZnet W5100S-EVB-Pico Evaluation Board is a compact development platform based on the Raspberry Pi RP2040 Microcontroller. The 133MHz RP2040 MCU has a dual Arm? Cortex?-M0+ core delivering high performance, with various low-power modes to support extended-duration operation on battery power. The RP2040 also features a large on-chip memory, symmetric dual-core processor complex, deterministic bus fabric, and a rich peripheral set augmented with the RPi Programmable I/O (PIO) subsystem.
Note: Product Images are shown for illustrative purposes only and may differ from the actual product.
Features:
RP2040 microcontroller with 2MByte Flash
Dual-core cortex M0+ at up to 133MHz
264kByte multi-bank high-performance SRAM
External Quad-SPI Flash with eXecute In Place (XIP)
High-performance full-crossbar bus fabric
30 multi-function General Purpose IO (4 can be used for ADC)
1.8-3.3V IO Voltage (NOTE. Pico IO voltage is fixed at 3.3V)
12-bit 500ksps Analogue to Digital Converter (ADC)
Various digital peripherals
2 × UART, 2 × I2C, 2 × SPI, 16 × PWM channels
1 × Timer with 4 alarms, 1 × Real Time Counter
2 × Programmable IO (PIO) blocks, 8 state machines total
Flexible, user-programmable high-speed IO
Can emulate interfaces such as SD Card and VGA
Includes W5100S
Supports Hardwired Internet Protocols: TCP, UDP, WOL over UDP, ICMP, IGMPv1/v2, IPv4, ARP, PPPoE
Supports 4 Independent Hardware SOCKETs simultaneously
Internal 16 Kbytes Memory for TX/ RX Buffers
SPI Interface
Micro-USB B port for power and data (and for reprogramming the Flash)
40 pin 21×51 ??DIP?? style 1mm thick PCB with 0.1?? through-hole pins also with edge castellations
3-pin ARM Serial Wire Debug (SWD) port
10 / 100 Ethernet PHY embedded
Supports Auto-Negotiation
Full / Half Duplex
10 / 100 Based
Built-in RJ45(RB1-125BAG1A)
Built-in LDO (LM8805SF5-33V)
Package Includes:
1 x WIZnet W5100S-EVB-Pico
Additional information
Weight | 0.018 kg |
---|---|
Dimensions | 9 × 3 × 3 cm |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.