-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
100k NTC Thermistor With Copper Tip for MK8 Extruder
- ₹105
- Temperature range of use: ?40?C to 270?C. Dissipation power factor: ?5 mW/? (static in the air). 100k Ohm NTC Thermistor. NTC Thin Film Thermistor Cable. Max power rating: 45 mW The hot time constant: ?7 s(in the air)
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
12V 3010 Cooling Fan for 3D Printer
- ₹78
- Perfectly fit on the extruder Noiseless Performance Very low Current consumption ?Easy to install and connect.
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
12V 4010 Cooling Fan for 3D Printer
- ₹58
- Perfectly fit on the extruder Noiseless Performance Very low Current consumption ?Easy to install and connect.
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
12V 5010 Cooling Fan for 3D Printer
- ₹74
- Perfectly fit on the extruder Noiseless Performance Very low Current consumption ?Easy to install and connect.
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
12V 5015 Cooling Fan for 3D printer
- ₹77
- Perfectly fit on the extruder Noiseless Performance Very low Current consumption ?Easy to install and connect.
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
24V 0.09A 4010 Cooling Fan for 3D Printer-High Quality
- ₹476
- Perfectly fit on the extruder Noiseless Performance Very low Current consumption ?Easy to install and connect.
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
24V 40W Reprap Cartridge Heater Wire 1 Meter
- ₹100
- Voltage: 24V Power: 40W Material: 304 Stainless Steel Wire Length:1M Diameter: 6mm
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
24V A820 FW4010 Brushless DC Cooling Fan with 2Pin Cable
- ₹476
- Brushless Cooling Fan Voltage: 24V Connector: 2-pin connector
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
26 Teeth Universal Stainless Steel Extrusion Gear for 3D Printer
- ₹31
- Inner diameter : 5 mm Gear Toothed Length : 7mm Outer diameter : 11mm Size(L x W) : 11mm x 11mm Number of Tooth : 26 Teeth
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
2mm x 3mm PTFE Teflon Tube for 1.5 mm 3D Printer Filaments
- ₹74
- Color: White Inner diameter: 2 mm Outer diameter: 3 mm It is used for the E3D V6 Extruder. Operating Temperature Range: -180?C to +260?C It has unique lubricity and the surface is no sticky. Material: PTFE Length: 1 Meter
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
4mm x 6mm PTFE Teflon Tube for 3.0mm 3D Printer Filament
- ₹133
- Color: White Inner diameter: 4 mm Outer diameter: 6 mm It is used for the E3D V6 Extruder. Operating Temperature Range: -180?C to +260?C It has unique lubricity and the surface is no sticky. Material: PTFE Length: 1 Meter
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
5V A818 FW4010 Brushless DC Cooling Fan with 2Pin Cable
- ₹140
- Brushless Cooling Fan Voltage: 5V Connector: 2-pin connector
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
A Type Aluminium Heat Sink for MK7 MK8 Extruder
- ₹90
- Dimensions: 40? x? 40 x? 11 mm Mounting Hole spacing: 31 mm Colour: Black Weight: 17g Fins Pattern: Straight Lines Material: Aluminium
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
BIGTREETECH BTT SFS V1.0 Smart Filament Sensor Detection Stuck Blocking Filament Module Material Breakage 3D Printer Parts SKR V1.4
- ₹1,368
- Easy to operate and use Wide application range A long service life ?fine quality material
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
Bowden V6 J-head Hotend Heatsink for 1.75 mm filament
- ₹126
- Easy to install and Use High-Temperature Performance Compatible Nozzle Size: M7
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
Cooling fan cover + 3010 Cooling Fan for 3D Printers
- ₹143
- Dimensions: 30mm ? 30mm ? 32mm Rated voltage: DC 12V Rated Current: 0.08A Application: 3D Printer Case Color: Blue + Black
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
Direct V6 J-head Hotend Heatsink for 1.75 mm filament
- ₹177
- Adaptable to multiple sizes nozzles Easy to install and Use High-Temperature Performance Inner diameter: ~2.45mm (End-1), 5.7mm (End-2)
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
Direct V6 Short Distance 1.75 3D Hotend Heatsink
- ₹126
- Adaptable to multiple sizes nozzles Easy to install and Use High-Temperature Performance Inner diameter: ~1.6mm (End-1), 4.7mm (End-2)
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
E3D 12V 30W Standard Heater Cartridge
- ₹1,651
- Length: 20mm Diameter: 6mm Lead length: 1000mm Cable Length: 1 meter. Resistance: 5.7 Ω
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
E3D Hemera Fan
- ₹1,297
- Model is E3D Hemera Fan Quiet performance Maximum regulator input 24V Dimensions are 40 x 40 x 10mm
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
E3D Revo CR HeatSink
- ₹4,129
- Product E3D Revo CR HeatSink Material Aluminium Color Black
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
E3D Revo HeaterCore with Spring
- ₹5,191
- New design Better heating performance Small size Easy nozzle change
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
E3D Revo Hemera Heatsink
- ₹5,899
- Compatible with 1.75mm filaments Updated heatsink design ?? compatible with Revo HeaterCore and Revo Nozzles Prevent part warping with specially designed fins and direct air up and away from your 3D print to prevent part warping No tools or hot tightening are needed when changing nozzles ?? Revo Nozzles?make it easy
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
E3D Revo Micro Fan
- ₹4,129
- Designed for Revo Micro heatsink Quiet performance Maximum fan input? 5V Maximum regulator input 24V Dimensions is? 20 x 20 x 10mm
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
E3D Revo Micro Fan Duct
- ₹235
- Easy to use Plug-and-play devices Lightweight ?Injection molded polycarbonate design Designed to fit?Revo Micro fan?and?Revo Micro heatsink?(sold separately)
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
E3D Revo Micro HeatSink
- ₹4,129
- Revo Micro??s anodized black aluminum heatsink is the smallest and lightest included on an E3D product so far. It??s compatible with Revo Nozzles and it attaches to a Revo HeaterCore using a Revo HeaterCore spring.
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
E3D Revo Spring Triple Pack
- ₹353
- Keeps the Heater Core into good thermal contact with a Revo Nozzle Effective in attaching Revo HeaterCore to heatsink Compatible with Revo Micro, Revo Six, and Revo Hemera
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
E3D Thermistor Cartridge
- ₹1,179
- Semitec 104GT thermistor, which is then potted into a cylindrical copper cartridge with a high conductivity ceramic-based adhesive. Legs are insulated with fibreglass sleeving and terminated with a Molex Microfit 3.0 connector.
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
E3D Titan Extruder Direct Drive Kit for 1.75mm filament
- ₹7,433
- E3D Titan Extruder 1.75mm with Direct Drive a Next-Generation Extruder for your 3D Printer brings high-performance, lightweight extrusion to everyone! All the benefits of geared extrusion in a lightweight, punchy little package.
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
E3D Titan Extruder Hobb (Hardened Steel)
- ₹4,573
- Hardened steel drive gear pre-fitted into Delrin large gear. Exceptionally abrasion resistant Drop in replacement for all Titan extruders.
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
E3D Titan Extruder Hobb (Stainless Steel)
- ₹2,736
- Hardened steel drive gear pre-fitted into Delrin large gear. Exceptionally abrasion resistant Drop in replacement for all Standard Titan extruders.
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
E3D V6 Heat Break 1.75mm
- ₹1,533
- E3D V6 Heat Break 1.75mm allows High Temp PTFE to pass into the melt zone. Works with?Tough Tube?and other high-temp PTFE tubings with no jams like with all metal heatbreaks.
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
Filament Break Detection Module (Black)
- ₹502
- Filament Break Detection Module Material: Plastic Color: Black Size: Suitable for 1.75mm Filament Mounting Hole Size: 3.5mm
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
HE3D 12V DC 3D Printer 5015 Vortex Turbo Cooling Fan
- ₹71
- 50mm Radial Cooling fan. 12V 2-point Pin DC 0.13A. Made of high-quality PBT 30% glass line VO Bearing is a high precision, long life, and low noise. Excellent for cooling heat sinks on hot ends, prints, or other cooling needs
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
High Temperature NTC 100K Thermistor with 1 Meter Cable
- ₹46
- Temperature range of use: ? 30 ? ~ + 350 ?. Dissipation power factor: ?5 mW / ? (static in the air). Sensor Diameter: 3 mm Cable Length: 1 meter Max power rating: 45 mW. Hot time constant : ?7 s(in the air) Temperature coefficient of resistance : ? 2 ~ 5% / ?
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
Left Side MK8 extruder Aluminum 3D Printer Block
- ₹241
- Left Side MK8 Extruder High-Quality Replacement for your blocked/damaged MK8 Extruder Available in 3 different types to support dual extruder setup Material: Aluminum alloy Weight: 60 gm
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
M6 Pneumatic Push in Bowden Extruders with 4*2mm Tube
- ₹42
- Material: Brass and Plastic Colour : Gold , Black Ring Thread size: M6
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
MK10 Left Side Extrusion Gear Molded Drive Block with Bearing (1.75mm 40 Teeth)
- ₹334
- High-Quality Filament Extruder Feeder Direct drive extruder feeder kit Left-hand version Sharp and effective filament gear is included Compatible with NEMA 17 stepper motors
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
MK7 Stainless Steel Extrusion Gear
- ₹73
- Material: Stainless Steel. Outer diameter: 12mm. Inner diameter: 5mm. Height: 13mm.
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
MK8 all Metal Bowden Extruder Kit Left Side for 1.75mm Filament Bulk Parts
- ₹527
- Suitable for: Creality CR-10 Series 3D Printer Types: Left-hand side parts Bracket Dimensions: (LxWxH) mm: 50x62x64 Mounting Holes Size: 5mm Colors: Red Main material: Metal, Mild Steel
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
MK8 All Metal Bowden Extruder Kit Right Side for 1.75mm Filament Bulk Parts
- ₹530
- Item name: MK8 All Metal Bowden Extruder Kit Suitable for: Creality CR-10 Series 3D Printer Types: Right-hand side parts Bracket Dimensions: (LxWxH) mm: 50x62x64 Mounting Holes Size: 5mm Colors: Red Main material: Metal, Mild Steel
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
MK8 Extruder Kit For Makerbot Prusa i3 3D Printer 1.75/0.4mm Printhead
- ₹2,024
- Extrusion nozzle: 0.4mm. Material Print: 1.75mm Nozzle Flow: About 24cc / hour Special ceramic heating insulation cotton guarantee stability; energy saving. Direct transmission, without heavy gear, compact size and weight There are a variety of specifications to choose the most suitable is the best 100K NTC thermistor, cooling fan
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
MKS 220DET Power Outage Detecting and Power Monitor Module for MKS TFT Touch Display
- ₹537
- Model: MKS 220DET V1.0 Power Input: 220V AC Component Compatibility: MKS TFT28 Display Module- MKS TFT24 / TFT32 / TFT35 / TFT70 Modules Weight: 15g
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
NTC3950 Thermistors Sensor with XH2.54 Cable
- ₹53
- Cable Length: 1 Meter High resistance and mechanical strength. Small size, lightweight, and cheap. NTC Thin Film Thermistor Cable. 2 pin Terminal End. Better Stability, as the chip is welded with leads by the alloy soldering process. Material: Glass sealed single end
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
PC4-M6 Pneumatic Push in Bowden Extruder for 3mm J-Head fitting
- ₹32
- Inside Diameter:?4mm Thread Size:?M6 PTFE Tubing Compatibility: 3mm ID PTFE Tubing (for 1.75mm Filament) Materials:?Nickel Plated Brass Release Method:?Elliptical John Guest Fitting
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
PC4-M6 Pneumatic Push in Bowden Extruder for 4mm J-Head Fitting
- ₹48
- Inside Diameter:?4mm Thread Size:?M6 PTFE Tubing Compatibility: 3mm ID PTFE Tubing (for 1.75mm Filament) Materials:?Nickel Plated Brass Release Method:?Elliptical John Guest Fitting
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
Pneumatic Coupler Air Connectors PC4-M5 4MM Straight Fitting For PTFE Bowden Tube 3D Printer
- ₹31
- Model: PC4-M5 Material: Copper Color: Brass Outer Diameter: 5 mm Working Pressure: 0-150PSI. Working Temperature: 0-60? C
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
Small 5V 140mA Turbo Air Intake Fan (Size: 40x40x20mm)
- ₹133
- Operating Voltage: 5V DC Operating Current: 140mA Normal Operating Temperature: 25?C-45?C. Weight: 26 gm. Life Expectancy: Dual Ball Bearing: 50000 hours. Sleeve Bearing: 20000-25000 hours. Reliable?quality?as?well?as?Competitive?price. Large?volume?flow?and?long?life?expectancy. High speed and large airflow. Low?noise?and?high?efficiency.
-