-
- Out of StockRead more
- 3D Printer Nozzle
0.1-1.0mm Mixed 3D Printer Nozzle Cleaning Drill Bit Kit for MK7 MK8RepRap 10Pcs
- ₹290
- Total Length: 38mm Shank Diameter: 3.17mm Size: 0.1mm to 1mm (Approx.) These nozzle drill cleaners are powerful tools that any 3D printer owner must have. As blocks happen a lot during the printing, nozzles must be cleaned to ensure flowing printing.
-
-
-
- Out of StockRead more
- 3D Printer Nozzle
0.4mm Stainless Steel Nozzle Cleaning Needle for 3D Printer- (Pack of 10 Pcs)
- ₹340
- 3D Printer nozzle cleaning needle with a diameter of 0.4mm. 1 set includes 5 pieces of 0.4mm size needles. For all 0.4mm nozzle (RepRap, Ultimaker, Makerbot, Flashforge, and more).
-
-
-
-
-
-
-
- Out of StockRead more
- 3D Printer Extruder Kit
1.75mm Bowden Extruder Full Kit
- ₹700
- This All complete Bowden V6 with Fan Cable 30cm Length for 1.75 mm filament 0.4 mm Nozzle contains the same signature high-temperature performance for high-temp printing, as well as increased functionality for printing soft and flexible filaments. This kit contains the thermistor, heater block, 0.4 mm Nozzle,? sleeving, cooling fan with holder.
-
-
-
- Out of StockRead more
- 3D Printer Extruder Kit
1.75mm Direct Extruder Full Kit
- ₹714
- Nozzle diameter: 0.4mm Voltage: 12V. Power: 40W. Operating Temperature: 200?C? to 280?C Compatible for ABS and PTEG material Feed diameter : For 1.75mm Filament (Direct) Heater size : 6 x 15mm (DxL). 1.75mm Direct Extruder Full Kit
-
-
-
-
-
-
-
- Out of StockRead more
- 3D Printer Extruder Kit
1.75mm Direct Extruder Kit without cooling Fan
- ₹733
- Nozzle diameter: 0.4mm Voltage: 12V. Power: 40W. Feed diameter: For 1.75mm Filament Heater size: 6 x 15mm (DxL). 1.75mm Direct Extruder Kit Without Fan.
-
-
-
-
- Out of StockRead more
- Sleeves and Drag Chain
10 x 10 mm Drag Chain Wire End Connectors Pair (Pack of 2)
- ₹105
- Good quality plastic. Lightweight. Easily replaceable.
-
-
-
-
-
-
-
- Out of StockRead more
- Smooth Rods
1000 MM long Chrome Plated Smooth Rod Diameter 10 MM
- ₹513
- High precision, high hardness, high stability. Strictly control every precision process to ensure quality. Simple design, durable material, high temperature preheat treatment, accurate outer hole size,
-
-
-
-
-
-
-
- Out of StockRead more
- Smooth Rods
1000 MM long Chrome Plated Smooth Rod Diameter 12 MM
- ₹487
- High precision, high hardness, high stability. Strictly control every precision process to ensure quality. Simple design, durable material, high temperature preheat treatment, accurate outer hole size,
-
-
-
-
-
-
-
- Out of StockRead more
- Smooth Rods
1000 MM long Chrome Plated Smooth Rod Diameter 16 MM
- ₹1,089
- High precision, high hardness, high stability. Strictly control every precision process to ensure quality. Simple design, durable material, high temperature preheat treatment, accurate outer hole size,
-
-
-
-
-
-
-
- Out of StockRead more
- Smooth Rods
1000 MM long Chrome Plated Smooth Rod Diameter 6 MM
- ₹681
- High precision, high hardness, high stability. Strictly control every precision process to ensure quality. Simple design, durable material, high temperature preheat treatment, accurate outer hole size
-
-
-
-
-
-
-
- Out of StockRead more
- Smooth Rods
1000 MM long Chrome Plated Smooth Rod Diameter 8 MM
- ₹392
- High precision, high hardness, high stability. Strictly control every precision process to ensure quality. Simple design, durable material, high temperature preheat treatment, accurate outer hole size,
-
-
-
-
-
-
-
- Out of StockRead more
- Lead Screw and Nut
1000mm Trapezoidal 4 Start Lead Screw 10mm Thread 2mm Pitch Lead Screw with Copper Nut
- ₹1,769
- Lead Screw Material: 304 Stainless Steel. Length: 1000mm. Diameter: 10 mm. 4 Start Lead Screw Brass Nut Size: 32(Body Diameter) x 19 mm. Mainly use for Stepping motor driving guide rail. T shape design, made of high-quality stainless steel material. Easy to install and convenient to use.
-
-
-
-
- Out of StockRead more
- Lead Screw and Nut
1000mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
- ₹778
- Lead Screw Material: 304 Stainless Steel. Length: 1000mm. Diameter: 8mm. 4 Start Lead Screw Brass Nut Size: 22 (Body Diameter) x 15 mm. Mainly use for Stepping motor driving guide rail. T shape design, made of high-quality stainless steel material. Easy to install and convenient to use.
-
-
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
100k NTC Thermistor With Copper Tip for MK8 Extruder
- ₹105
- Temperature range of use: ?40?C to 270?C. Dissipation power factor: ?5 mW/? (static in the air). 100k Ohm NTC Thermistor. NTC Thin Film Thermistor Cable. Max power rating: 45 mW The hot time constant: ?7 s(in the air)
-
-
-
-
-
- Out of StockRead more
- Timing Belt and Pulley
10M GT2 Width 6mm Black Open Timing Belt For 3D Printer
- ₹1,074
- Pitch: 2mm Material: Neoprene Rubber With Fiberglass Core Width: 6mm Total Length: 10M Shape: Open Loop Core Wire Material: Glass Fiber
-
-
-
-
-
-
-
- Out of StockRead more
- Timing Belt and Pulley
10M GT2 Width 6mm White Open Timing Belt For 3D Printer
- ₹1,090
- Pitch: 2mm Material: Polyurethane Width: 6mm Total Length: 10M Shape: Open Loop Core Wire Material: Steel
-
-
-
-
-
-
-
- Out of StockRead more
- Other 3D Printer Accessories
10mm 100ft High Temperature Heat Resistant Polyimide Koptan Tape Hot
- ₹97
- Width: 10 mm Length: About 33m. Type: Polyimide Tape. Heat Resistance: 200?. Thickness Tolerance:??10% . One-side Self-adhesive.
-
-
-
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
12V 3010 Cooling Fan for 3D Printer
- ₹78
- Perfectly fit on the extruder Noiseless Performance Very low Current consumption ?Easy to install and connect.
-
-
-
-
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
12V 4010 Cooling Fan for 3D Printer
- ₹58
- Perfectly fit on the extruder Noiseless Performance Very low Current consumption ?Easy to install and connect.
-
-
-
-
-
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
12V 5010 Cooling Fan for 3D Printer
- ₹74
- Perfectly fit on the extruder Noiseless Performance Very low Current consumption ?Easy to install and connect.
-
-
-
-
-
-
-
- Out of StockRead more
- 3D Printer Extruder Parts and Fans
12V 5015 Cooling Fan for 3D printer
- ₹77
- Perfectly fit on the extruder Noiseless Performance Very low Current consumption ?Easy to install and connect.
-
-
-
-
-
-
-
- Out of StockRead more
- Lead Screw and Nut
150mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
- ₹179
- Lead Screw Material: 304 Stainless Steel. Length: 150mm. Diameter: 8mm. 4 Start Lead Screw Brass Nut Size: 10 x 13 x 22 mm. Mainly use for Stepping motor driving guide rail. T shape design, made of high-quality stainless steel material. Easy to install and convenient to use.
-
-
-
-
-
- Out of StockRead more
- Timing Belt and Pulley
1M GT2 Width 6mm Black Open Timing Belt For 3D Printer
- ₹93
- Pitch: 2mm Material: Neoprene Rubber With Fiberglass Core Width: 6mm Total Length: 1 Meter Shape: Open Loop Core Wire Material: Glass Fiber
-
-
-
-
-
-
-
- Out of StockRead more
- Timing Belt and Pulley
2 Meter GT2 Timing Belt + 2Pcs of GT2 pulley (20 teeth)
- ₹591
- The Pulley and The Timing Belt combo forms an integral part of the 3-D printer. These are used for the precision motion to print?even the most intricate designs.
-
-
-
-
-
