Description

This is an E-Ink display HAT for Raspberry Pi 2.13inch, 212×104 resolution, with an embedded controller, communicating via SPI interface, supports the red, black, and white three-colour display.
There is no backlight so it can keep displaying last content for a long time even when the power is down. As these displays?have no backlight?panels and it doesn??t need a continuous?power supply to display the (static data with periodic intervals) data on the screen, it?has a great advantage of ultra-low power consumption. Also, it?has a wide viewing angle, great viewing effect under sunlight,? Basically power to the display is only required for refreshing. For connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.. SPI interface can be used.

Features:

No backlight keeps displaying last content for a long time even when power?is down
Ultra low power consumption, basically power is only required for refreshing
Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Interface:

SYMBOL
DESCRIPTION

VCC
3.3V/5V

GND
Ground

DIN
SPI MOSI pin

CLK
SPI SCK pin

CS
SPI chip selection, low active

DC
Data/Command selection (high for data, low for command)

RST
External reset, low active

BUSY
Busy status output, high active

Useful Links:
Wiki :?www.waveshare.com/wiki/2.13inch_e-Paper_HAT_(B)

Package Includes:
1 x Waveshare 2.13inch E-Ink Paper display HAT for Raspberry Pi, Three-Color
1 x Interfacing Cable
1 x Nut-Bolt and Spacer set
Note: No Raspberry Pi is included in Package