Description

Ai Thinker ESP32-C3-01M WiFi Module from ESP32-C3-01M series modules. The chip ESP32-C3-01M is equipped with a 32-bit RISC-V single-core processor with a working frequency of up to 160 MHz. It supports secondary development without the use of other microcontrollers or processors. It is a highly integrated low-power Wi-Fi plus Bluetooth system-on-chip (SoC), designed for various applications such as the Internet of Things (IoT), mobile devices, wearable electronic devices, and smart homes. The module supports Wi-Fi IEEE 802.11b/g/n protocol and BLE 5.0 protocol stack, and only supports 2.4G frequency band, not 5G frequency band.
The chip has a built-in 400 KB SRAM, 384 KB ROM, 8KB RTC SRAM, a built-in 4MB Flash, and also supports external Flash. The chip supports a variety of low power consumption working states, which can meet the power consumption requirements of various application scenarios. The chip??s unique features such as fine clock gating function, dynamic voltage clock frequency adjustment function, and RF output power adjustable function can achieve the best balance between communication distance, communication rate, and power consumption. The module provides a wealth of peripheral interfaces, including UART, PWM, SPI, I2S, I2C, ADC.
The module supports low-power Bluetooth: Bluetooth5, Bluetooth mesh, Bluetooth rate support: 125Kbps, 500Kbps, 1Mbps, 2Mbps. Support broadcast extension, multi-broadcasting, channel selection.
Note: This product is about to be discontinued. You can check out for its alternative:?SKU 1382873 Ai-Thinker Ai-WB2-12F Module

?Features:

Complete Wi-Fi 802.11b/g/n，1T1R mode data rate up to 150Mbps
Support BLE5.0 and rate support：125Kbps，500Kbps，1Mbps,2Mbps
32-bit RISC-V single-core processor, supports a clock frequency of up to 160 MHz, with 400 KB SRAM，384 KB
ROM，8KB RTC SRAM
Support UART/PWM/GPIO/ADC/I2C/I2S interface, temperature sensor, pulse counter
SMD-22 package
Support multiple sleep modes, deep sleep electric current is less than 5uA
UART rate up to 5Mbps
Support STA/AP/STA+AP mode and mix mode
Support Smart Config (APP)/AirKiss (WeChat) of Android and IOS One-click network
configuration
Support UART port local upgrade and remote firmware upgrade (FOTA)
General AT commands can be better understand
Support secondary development, integrated Linux development environment
About Flash configuration
Acquiesce in using the built-in 4MByte Flash.

Note: For more details about the product, go through the datasheet in the attachment

Package Includes:
1 xAi Thinker ESP32-C3-01M Wi-Fi + BLE Module