Description

The NANO32 ESP32 IoT Development Board is the product by the designers of Arduino Nano and Espresso Lite (Thailand-based Gravitech and MakerAsia respectively) is the first third-party development board that provides another alternative to the eager-beavers community of geeks, makers, hackers and developers interested in the latest Wi-Fi/BT combo ??wonder?? chip.
This NANO32 ESP32 IoT Development Board is the big brother of the ESP8266 development board. Nano32 is collaboration work by Makerasia and Gravitech from Thailand. It is base on ESP32 SoC. ESP32 the flagship product from Espressif (the company that design and produce ESP8266), but now with Xsensa Dual-Core 32-bit processors that case provides 600DMPIS. Let??s look at the features and Specification of this board.
The ESP32 is the latest chipset to be released by Shanghai-based, Espressif Systems that combines both Wi-Fi and Bluetooth (BT) capabilities within its dual CPU core and a rich accompaniment of hardware peripherals.
Designed as an ultra-low power chip using TSMC 40nm technology, it employs a customized CPU design based on the Cadence? Tensilica? Xtensa? Dual-Core 32-bit LX6 600 DMIPS.

Specifications and Features:

ESP32 SoC (System on Chip) with WiFi and Bluetooth BLE
40MHz Crystal for CPU, 32.768KHz for RTC and low power operation
4MB Flash (32MBit)
FTDI231 for the USB to Serial communication
Auto-reset for an automatic flash of the new program
Onboard 3.3V, 0.5A LDO tested to work up to 1A
2.5dBi Peak Gain, 0.5dBi average gain antenna

Key Features of ESP32 SoC:

Xtensa? Dual-Core 32-bit LX6 microprocessors, up to 600 DMIPS

Integrated 520 KB SRAM

Integrated 802.11BGN HT40 Wi-Fi transceiver, baseband, stack and LWIP

Integrated dual mode Bluetooth (classic and BLE)

4 MByte flash (32Mbit)

2.2V to 3.6V operating voltage

-40?C to +125?C operating temperature

32 GPIO

ESP32 Wi-Fi : ?

802.11 b/g/n/e/i

802.11 n (2.4 GHz), up to 150 Mbps

802.11 e: QoS for wireless multimedia technology

WMM-PS, UAPSD

A-MPDU and A-MSDU aggregation

Block ACK

Fragmentation and defragmentation

Automatic Beacon monitoring/scanning

802.11 i security features: pre-authentication and TSN

Wi-Fi Protected Access (WPA)/WPA2/WPA2-Enterprise/Wi-Fi Protected Setup (WPS)

Infrastructure BSS Station mode/SoftAP mode

Wi-Fi Direct (P2P), P2P Discovery, P2P Group Owner mode and P2P

Power Management

UMA compliant and certified

Antenna diversity and selection

ESP32 Bluetooth :

Compliant with Bluetooth v4.2 BR/EDR and BLE specification

Class-1, class-2 and class-3 transmitter r without external power amplifier

Enhanced power control

+10 dBm transmitting power

NZIF receiver with -98 dBm sensitivity

Adaptive Frequency Hopping (AFH)

Standard HCI based on SDIO/SPI/UART

High speed UART HCI, up to 4 Mbps

BT 4.2 controller and host stack

Service Discover Protocol (SDP)

General Access Profile (GAP)

Security Manage Protocol (SMP)

Bluetooth Low Energy (BLE)

ATT/GATT

HID

All GATT-based profile supported

SPP-Like GATT-based profile

BLE Beacon

A2DP/AVRCP/SPP, HSP/HFP, RFCOMM

CVSD and SBC for audio codec

Bluetooth Piconet and Scatternet?

GPIO Peripherals :

3 x UARTs, including hardware flow control

3 x SPI

2 x I2S

12 x ADC input channels

2 x DAC

2 x I2C

PWM/timer input/output availabe on every GPIO pin

OpenOCD debug interface with 32 kB TRAX buffer

SDIO master/slave 50 MHz

Supports external SPI flash up to 16 MB

SD-card interface support

Security Related :

IEEE 802.11 standard security features all supported, including WFA, WPA/WPA2 and WAPI
Secure boot
Flash encryption
1024-bit OTP, up to 768-bit for customers
Cryptographic hardware acceleration:

AES
HASH (SHA-2) library
RSA
ECC
Random Number Generator (RNG)

Package Includes :
1 x?NANO32 ESP32 IoT Development Board