CUAV C-RTK 9Ps Positioning Module | High Precision GPS RTK GNSS Pixhawk

115,462

Centimeter-level positioning for industrial UAV
10s switch RTK mode
20Hz high-frequency RTK navigation refresh rate
<10s shorter convergence time 2 x 9Ps modules serve as a GPS PX4 and Ardupilot dual-platform compatible Universal Type-C interface adopted on both mobile/ground end, switch freely

Out of stock

SKU: A12341 Category:

Description

This is a CUAV C-RTK 9Ps Positioning Module | High Precision GPS RTK GNSS Pixhawk.
C-RTK 9Ps Positioning Module is a centimeter-level GNSS module. Using two c-RTK modules, one installed on the base and the other installed on the UAV, a real-time GNSS system is designed. By using dual GPS on the plane, you can replace the compass and have a dual GPS yaw. This is desirable due to the error of the compass coming from electromagnetic interferences, suitable for environments with high noise. Compatible with open-source autopilots like PX4 or Ardupilot, this RTK module is an ideal choice for aerial performance and agricultural applications. You can have high-precision take-off, landing, and missions.
A ublox F9P module is used inside to support multiple frequencies as well as the reception from different satellite systems ? GPS, Beidou, Glonass, and Galileo.
Due to using multiple satellites and multiple frequencies, and with the help of advanced RTK algorithms, the position of the base station converges and provides centimeter-level differential data in less than half a minute. The update rate of the RTK algorithm is at 20Hz.
The base and rover units are the same modules with different configuration parameters and different antennas. That just makes it easy to use them in place of each other by just changing a few parameters. However, the antenna used on the rove has a 2dBi gain, while the base station uses a 5dBi gain antenna. The modules are only 30g and can work in harsh environments and temperatures from ?40?C to +85?C.
Note: For more technical details go through USER GUIDE in the attachment section

Features:

Multi-star Multi-Frequency High- Precision Positioning

Built-in u-blox F9P multi-star multi-frequency satellite receiver with concurrent reception of GPS, GLONASS, Galileo, and BeiDou. Positioning accuracy: <0.01m +1ppm CEP. Ultra-fast positioning Multi-satellite, multi-frequency receiver combined with advanced RTK algorithms enables the C-RTK 9Ps Positioning Module base station to complete convergence and achieve centimeter-level positioning in under 30 seconds. Dual RTK for yaw, Adapts to a complex environment Dual C-RTK 9Ps Positioning Module can estimate yaw which can replace the magnetic compass. This is useful for flight in complex magnetic field environments such as close to power lines. Fast switch between sky and rover unit CUAV C-RTK 9Ps Positioning Module adopts the same design as the two units (sky unit and rover unit), and the two units use the same firmware. You only need to load different configuration parameters to complete the fast switching. The CUAV C-RTK 9Ps Positioning Module can support all versions of CUAV Flight Controllers. Packing Includes: Rover unit stands combo: 1x CRTK 9Ps 1 x ?Multi-star multi-frequency spiral antenna 1 x Carbon fiber antenna stand (30mm+bracket) 1 x Pixhack cable (250mm) 1 x V5+/x7 Series (UART1->GPS) cable (250mm)
1 x V5+/x7 Series (UART1->UART4) cable (250mm)
1 x PX4 GPS YAW (UART2->UART2) cable (250mm)
Base unit combo:
1 x C-RTK 9Ps
1 x Multi-star multi-frequency mushroom head antenna
1 x Base station feeder (550mm)
1 x Standard Type-C USB cable (1m)

Additional information

Weight 1.179 kg
Dimensions 28 × 23 × 16 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.