-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model
- ₹325
- Supply Voltage: 12V Standard interfaces (as that of the extruder) Reserved GCI like I2C and RS232 3 MOSFET??s?are applied to the heater/ fan and thermistor circuit. Another 5A added to protect the component parts. An 11A fuse is added to the hotbed. Support 5 stepper drive board
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
86BLS98-X015 48V-RPM3000-1.56N-m- 111.5mm
- ₹8,495
- Model: 86BLS98-X015 Operating voltage: 48V Shaft Type: Key Type Torque: 1.56?N-m
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
A4988 Stepper Motor Driver Controller Board- RED
- ₹74
- Compact size, easy to install and use. All jumpers hit the ON position to indicate 16 subdivisions (4988) or 32 subdivisions (8825). Jm connection motor: Jv Connects 5V and 12V-24V Power Supply. E /S /D /G of Jc corresponds to Enable /Step /Dir /Gnd driving signal output on the connection respectively.
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
BIGTREETECH BTT TMC2130 V3.0 Stepper Motor Driver
- ₹884
- 1. Up to 256 subdivisions; 2. Support SPI interface control; 3. Do not lose step when driving under high load; 4. Logic voltage: 3.3V/5V; 5. Input voltage range: 12V/24V DC; 6. Motor operating current 1.2a (peak 2A) can be adjusted 7. Spreadcycle ensures that the stepper motor has a smooth transition without dead zone current when passing zero.
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
BIGTREETECH BTT TMC2209 V1.3 Stepper Motor Driver
- ₹628
- Silent Motor Movement Sensor less Homing Dynamic Current Control Supports UART, STEP/DIR Modes
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
BLD120 Brushless DC Motor Driver
- ₹3,397
- Model: BLD120 Input voltage:+12 to +30V DC Rated (RPM): 0 to 20000
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
BLD750 Brushless DC Motor Driver
- ₹8,684
- Model: BLD750 Input voltage: 15~52 VDC Rated (RPM): 0-20000
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
DM542 Stepper Motor Driver
- ₹2,804
- Model: DM542 Power Consumption: 80 Watt Input Current:
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
DM860H Stepper Motor Driver
- ₹4,455
- Model: DM860H Input voltage: 24V??110VDC Weight: 487g Input Frequency: up to 200KHz
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
DRV8833 2 Channel DC Motor Driver
- ₹77
- Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor Operating voltage: 2.7?????V to 10.8?V Output current: 1.2?A continuous (2?A peak) per motor Inputs are 3V- and 5V-compatible
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
MakerBase MKS TMC2225 Stepper Motor Driver with Heat Sink
- ₹388
- MakerBase MKS TMC2225 Stepper Motor Driver with Heat Sink Model: TMC2225 Length: 20mm Width: 15mm Weight: 6g
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
MKS CD V1.0 External Stepper Driver Interfacing Module
- ₹199
- Helps You Utilize External Stepper Drivers Acts As Interface Between Full-Sized Drivers And The A4988 Form Factor Easy To Use
-