-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model
- ₹325
- Supply Voltage: 12V Standard interfaces (as that of the extruder) Reserved GCI like I2C and RS232 3 MOSFET??s?are applied to the heater/ fan and thermistor circuit. Another 5A added to protect the component parts. An 11A fuse is added to the hotbed. Support 5 stepper drive board
-
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
86BLS98-X015 48V-RPM3000-1.56N-m- 111.5mm
- ₹8,495
- Model: 86BLS98-X015 Operating voltage: 48V Shaft Type: Key Type Torque: 1.56?N-m
-
-
-
-
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
A4988 Stepper Motor Driver Controller Board- RED
- ₹74
- Compact size, easy to install and use. All jumpers hit the ON position to indicate 16 subdivisions (4988) or 32 subdivisions (8825). Jm connection motor: Jv Connects 5V and 12V-24V Power Supply. E /S /D /G of Jc corresponds to Enable /Step /Dir /Gnd driving signal output on the connection respectively.
-
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
BIGTREETECH BTT TMC2130 V3.0 Stepper Motor Driver
- ₹884
- 1. Up to 256 subdivisions; 2. Support SPI interface control; 3. Do not lose step when driving under high load; 4. Logic voltage: 3.3V/5V; 5. Input voltage range: 12V/24V DC; 6. Motor operating current 1.2a (peak 2A) can be adjusted 7. Spreadcycle ensures that the stepper motor has a smooth transition without dead zone current when passing zero.
-
-
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
BIGTREETECH BTT TMC2209 V1.3 Stepper Motor Driver
- ₹628
- Silent Motor Movement Sensor less Homing Dynamic Current Control Supports UART, STEP/DIR Modes
-
-
-
-
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
BLD120 Brushless DC Motor Driver
- ₹3,397
- Model: BLD120 Input voltage:+12 to +30V DC Rated (RPM): 0 to 20000
-
-
-
-
-
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
BLD750 Brushless DC Motor Driver
- ₹8,684
- Model: BLD750 Input voltage: 15~52 VDC Rated (RPM): 0-20000
-
-
-
-
-
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
DM542 Stepper Motor Driver
- ₹2,804
- Model: DM542 Power Consumption: 80 Watt Input Current:
-
-
-
-
-
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
DM860H Stepper Motor Driver
- ₹4,455
- Model: DM860H Input voltage: 24V??110VDC Weight: 487g Input Frequency: up to 200KHz
-
-
-
-
-
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
DRV8833 2 Channel DC Motor Driver
- ₹77
- Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor Operating voltage: 2.7?????V to 10.8?V Output current: 1.2?A continuous (2?A peak) per motor Inputs are 3V- and 5V-compatible
-
-
-
-
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
MakerBase MKS TMC2225 Stepper Motor Driver with Heat Sink
- ₹388
- MakerBase MKS TMC2225 Stepper Motor Driver with Heat Sink Model: TMC2225 Length: 20mm Width: 15mm Weight: 6g
-
-
-
-
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
MKS CD V1.0 External Stepper Driver Interfacing Module
- ₹199
- Helps You Utilize External Stepper Drivers Acts As Interface Between Full-Sized Drivers And The A4988 Form Factor Easy To Use
-
-
-
-
-
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
MKS SBASE V1.3 32-bit Open Source Smoothieboard
- ₹6,432
- 32bit 100M Cortex-M3 MCU-LPC 1768 High-performance Support highly modular open source firmware Smoothieware Easy for secondary development ?Support network function, then proceed remote control via IE Explorer.
-
-
-
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
MKS-LV8729-OC 1.5A Ultra Quiet Stepper Motor Driver for 3D Printers and CNC
- ₹964
- High-speed optocoupler, high-speed without losing a step LV8729 chip, with over-current protection circuit, the maximum support 128 segments Automatic half-flow function A variety of input methods to meet a variety of interface needs The use of increased heat sink, good heat dissipation
-
-
-
-
-
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
Smoother module for stepper driver motor
- ₹116
- Add-on module for stepper motors of 3D Printers. Compatibility: All types of FDM 3D Printers. Product Type: Smooth Reduced vibration ?Reduces noise emission and detailed results.
-
-
-
-
-
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
TL-Smoother Eight Chip Module DFORCE Vibration Pattern Filter with Cable
- ₹129
- TL Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors, The TL-Smoother is an addon module for 3D printer stepper motor drivers. The board provides flyback diodes for the motor outputs, so they are also protected against inductance voltages in the unpowered state of the driver. You will get smoother movement, especially on the delta-style 3D printer…
-
-
-
-
-
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
TMC2209 V3.0 Stepper Motor Driver Module
- ₹506
- Microstepping: Up to 1/256 micro stepping Maximum current: 2.8A RMS, 4.0A peak Voltage range: 4.75V to 28V DC Logic voltage: 3.3V and 5V compatible
-
-
-
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
ULN2003A Driver Module Stepper Motor Driver
- ₹63
- 5-12V power supply 4-way signal indicator Chip all the pins have Input leads Mounted for easy connection to use XH-5P socket can be connected directly 28BYJ-48 Model stepper motor Dimensions: 32 x 18 x 11mm (LxWxH) Weight: 3 gm
-
-
-
-
-
-
- Out of StockRead more
- Drivers, Motors, Pumps, Stepper Motor Drivers
Waveshare Motor Control Board
- ₹589
- operating voltage:5V motor drive voltage:4.5V-36V Dimension : 43mm*27mm Mounting hole size: 2mm
-
-
-
-
-