Continuous Discharging Current: 60A Charging Voltage: 54.6V Maximum Over-current Protection:170 A Balance Voltage with single-cell:4.2 V Overcharge detection voltage:4.25 V
High accuracy voltage detection circuit; Using high voltage device charging terminal; The built-in three-stage overcurrent detection circuit (overcurrent 1, overcurrent 2, load short circuit); The battery charge and discharge can control the MOS transistor;
Over charge detection voltage : 4.25 + 0.05V Over charge release voltage : 4.23 + 0.05V discharge detection voltage : 2.45 + 0.1V Ceiling continuous current : 12A Overcurrent detection current : 7.5A Input Charging voltage : 3.7V
Over Charge Voltage Range: 4.25-4.35 V + 0.05? V Over Voltage Range: 2.5-3.0 V?+ 0.05 V Max. Operating Current: 13 A Max. Limiting Current: 20 A Charging Voltage: 8.4-9 V
3S 11.1V 12.6V 40A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery) Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery) Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use) Continuous charge current (upper limit): 20A
The Successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 cannot start the drill!!) Strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.
Charging voltage: 21V Charging current: 56 A Continuous discharge current: 15 A Over current protection: 50/55/60 A Over current protection delay: 20/25/30 mS Single section power consumption since: 30uA Single section discharge detection voltage: 2.75-2.85V Over discharge recovery voltage: 2.90-3.20V
Power supply voltage: 15-28VDC(Recommended 16-25VDC) Over? Charge Voltage is 14.8V Float Charge Voltage is 13.55V Maximum charge current: 3A Quiescent current: about 1.8mA High PWM Switching Frequency:300KHz Operating Ambient Temperature: -40?? to +85?? Size: 66 x 20x 12mm Weight: 9g
Input interface: Type C Current Protection: Yes Charging mode: Linear charging. Current: 1A adjustable. Charge precision: 1.5%. Input voltage: 4.5V-5.5V. Full charge voltage: 4.2V.
Input voltage : 4.5V ~ 5.5V. Input Interface: Micro USB port. Charging method: linear charge. A full charge voltage: 4.2V. Power: 4.2 w. Charging accuracy: 1.5%. Operating Temperature: -10 to +85?C Charging indicator: LED indicators for charging and full charging.
Input voltage: 5-15V DC power supply. Charge status: full and unloaded blue lights, charging red. Double 8.4v / 4.2v lithium rechargeable single . Programmable charge current. 0. 1A-2A . Programmable steady precharge current 10% -100%. Wide operating voltage, maximum reach I8V. Red and green LED charge status indicator. Chip temperature protection, overcurrent protection, under voltage protection. Battery temperature protection, reverse…
Model: XH ?? M609 Power supply voltage:?12 V- 36 V battery Output voltage: Equal to power supply voltage Control precision: 0.1 V Power consumption: Less than 1.5 W
