Model: STMICROELECTRONICS Development Board, STM32F446ZE MCU Voltage: 3.3 V and 7 -12 V USB OTG or full-speed device with Micro-AB connector (depending on STM32 support) Crystal oscillator: 32.768 KHz
Microcontroller SAM D21 Operating Voltage USB 5V Power Input Port USB Type C JST2.0 Lipo Battery SRAM 32 KBFlash 256 KB Recoverable fuse Protection current 1A Battery Charge Current 400 mA
Compatible with NUCLEO-F103RB, onboard Cortex-M3 microcontroller STM32F103RBT6 Arduino connectivity support, easy to connect with various Arduino shields and access the massive Arduino resources ST Morpho headers provide full access to all STM32 I/Os, easy for peripheral expansion Supports mbed, build prototype quickly by mbed SDK and online tools Comprehensive free software HAL library including a variety of software examples
Product: TE CONNECTIVITY PMOD MS8607 / PLASTIC BAG 03AC1347 Operating pressure range: 300 to 1200 mbar ?Measures relative humidity from 0% to 100% ?Measures temperature from -40?C to 125?C ?Extended pressure range 10 to 2000 mbarr
Model: STMICROELECTRONICS? B-U585I-IOT02A? Discovery Kit, STM32U585AI, STM32 Family Memory: 512??Mbit Quad-SPI Flash memory, 64??Mbit Octo??SPI PSRAM, 256??Kbit I2C EEPROM CPU: 32bit ARM Cortex-M33 MCU USB FS, Sink and Source power, 2.5 W power capability 802.11 b/g/n compliant Wi??Fi?module from MXCHIP Bluetooth?Low Energy from STMicroelectronics
Product: STM32L0538-DISCO Development Board STM32L053C8T6 ARM 32bit Cortex-M0+ with MPU USB re-enumeration capability with three different interfaces supported on the USB Board power supply through USB bus or from an external 5V supply voltage
Product: NUCLEO-L496ZG-P Development Board Source options for power supply are USB charger, VIN (7 ?? 12V) from ST Zio connector ST-LINK/V2-1 standalone kit capability USB re-enumeration capability, virtual COM port, mass storage, debug port 1Mbyte STM32 flash memory size, MCU with SMPS function
Product: STMICROELECTRONICS NUCLEO-L073RZ Development Board STM32 microcontroller 1 user LED shared with ARDUINO? 1 user and 1 reset push-buttons 32.768KHz crystal oscillator
Product: NUCLEO-F303K8 Development Board, STM32F303K8 MCU Extension with Arduino???nano connectivity On-board ST-LINK/V2-1 debugger/programmer with SWD connector ?? USB VBUS, external source USB communication (LD1), power LED (LD2), user LED (LD3)
Product: NUCLEO-F072RB Development Board Two push buttons for the user and reset STM32 comprehensive software HAL library Three LED indications for USB communication,
Product: NUCLEO-F042K6 Development Board Extension with Arduino???nano connectivity On-board ST-LINK/V2-1 debugger/programmer with SWD connector ?? USB VBUS, external source USB communication (LD1), power LED (LD2), user LED (LD3)
Product: STMicroelectronics Expansion Board, STSPIN240 Dual Brush DC Motor Driver, For STM32 Nucleo Current Rating (A): 1.3 Silicon Manufacturer: STMicroelectronics For Use With: STM32 Nucleo Development Boards
Product: STMicroelectronics Expansion Board, STSPIN230 Low Voltage 3-Phase Brushless DC Motor Driver Low voltage range from 1.8 V to 10 V Thermal shutdown Current up to 1.3 A ?Current control with adjustable off-time
Product: STMicroelectronics Expansion Board, STSPIN220 Low Voltage Stepper Motor Driver, For STM32 Nucleo Low voltage range: 1.8 to 10 V Microstep adjustment up to the 256th step Phase current: up to 1.3 A
Product: STMicroelectronics Expansion Board, STM32L496VGT6 MCU, Power Consumption Measurement, For STM32 Nucleo Processor: Arm? Cortex?-M4 core Voltage (V): 1.8 -3.3 Static Current Measurement: 1 nA to 200 mA
Product: STMICROELECTRONICS Expansion Board, SPSGRF 868 MHz ISM Band RF Transceiver Module, For STM 32 Nucleo Compatible with STM32 Nucleo boards Equipped with Arduino UNO R3 connectors Scalable solution, capable of cascading multiple boards for larger systems Example firmware for point-to-point communication, compatible with STM32Cube firmware
Product: STMicroelectronics Expansion Board, Ranging/Gesture Detection, VL53L0X, For STM32 Nucleo, Arduino Compatible VL53L0X ranging and gesture detection sensor module. Accurate absolute ranging distance, independent of the reflectance of the target. 4-digit display, displaying the distance of a target from the ranging sensor.
Product: STMICROELECTRONICS Expansion Board, IPS161HF, STM32 Nucleo Development Board Red LED for diagnostics (open load, cut-off and overheating) 3KV galvanic isolation Supply rail reverse polarity protection Ready for safety digital output architecture
Product: STMICROELECTRONICS Expansion Board, IPS160HF, STM32 Nucleo Development Board Operation up to 60 V/2.4 A Low power dissipation (RON(MAX) = 120 mΩ) Application board operating range: 12 to 33 V/0 to 2.4 A ?Extended voltage operating range (J1 open) up to 60 V Application board operating range: 12 to 33 V/0 to 2.4 A ?Status and diagnostic LEDs
Product: STMICROELECTRONICS Expansion Board, 2.1-Channel Audio System, 2x50W, STA350BW, For STM32 Nucelo, Arduino Compatible 2 channels of ternary PWM 2 x 50W @ 25V 6 Ω FFX ?? 100 dB SNR and dynamic range ?I?C control with the selectable device address
Model: STM32F072RB MC Product: STMICROELECTRONICS Development Kit On-Board ST-LINK/V2, ST MEMS Gyroscope, Extension Header Power supply: 3 V and 5 V One linear touch sensor or four touch keys
Model: STMICROELECTRONICS Development Board, Teseo-LIV3F GNSS Module, For STM32 Nucleo Predictive autonomous, predictive server-based and real-time server-based assisted GNSS LNA and SAW filter on the RF path SMA female antenna connector Battery holder
Product: STMICROELECTRONICS Development Board, STSPIN840 DC Motor Driver, Dual Brush, Arduino, ST Morpho, For STM32 Nucleo Circuit Voltage: 7-45v Max. Output Current (Amp): 1.5 For Use With:? STMicroelectronics STM32 Nucleo Development Boards
STM32F334C8T6 ARM Cortex-M4 32bit CPU with FPU(72MHz), single cycle multiplication and HW division Onboard ST-LINK/V2-1 with selection mode switch to use the kit as a standalone STLINK/ V2-1 USB re-enumeration capability with three different interfaces supported on USB Power supply through USB bus or from an external 5V supply voltage Extension header for LQFP48 I/Os for a quick connection to…
Model: STM32F103RBT6 MCU Product: STMICROELECTRONICS Development Board Voltage: 3.3V, 5V, 7-12V STM32 Nucleo-64 board does not require any separate probe as it integrates the ST-LINK debugger/programmer.
Model: STM32 Nucleo-64, STM32F030R8T6 MCU Product: STMICROELECTRONICS Development Board, STM32 Three interfaces supported on USB. Virtual Com port, Mass storage and Debug port STM32 comprehensive software HAL library Supported by Integrated Development Environments (IDEs) including IAR, Keil, GCC based IDEs
Product: STMICROELECTRONICS Daughter Board, SPSGRF-915 SPIRIT1 RF Module, For STM32 Nucleo Boards, 915 MHz ISM band Silicon Manufacturer: ?STMicroelectronics Silicon Core Number: SPSGRF-915 For Use With: ?STM32 Nucleo Development Boards
Product: STMicroelectronics Daughter Board, BlueNRG-MS Low Energy Bluetooth Smart IC, Bluetooth 4.1 Specification Compliant Maximum transmission power +8 dBm ?Excellent receiver sensitivity (-88 dBm) ?Very low power consumption: 7.3 mA RX and 8.3 mA TX at +0 dBm
STM32F103RBT6 microcontroller UEXT connector which allows many existing modules like RF, ZIGBEE, GSM, GPS to be connected Allows RTC ?? Real Time Clock. CAN with driver allows automotive applications micoSD-card for data logging NOISE IMMUNE design. A mini USB connector is used, which is common. 4 mount holes make board attachment easier.
Product: NXP LPC55S69-EVK Development Board, LPCXpresso55S69 Hardware support for external debug probe NXP MMA8652FCR1 accelerometer and stereo audio codec with a line in/out Mikro Eletronika clicked the expansion option
Model: NXP Development Board, LPC11U68 MCU Single power supply (2.4 V to 3.6 V). Separate VBAT supply for RTC. Operating temperature range: 40 ?C to 105 ?C Memory: ?Up to 256 KB on-chip flash programming memory with page erase and Up to 32 KB main SRAM.
32-bit ARM Cortex-M0 microcontroller from Nuvoton. Premounted with NUC140VE3CN as the target microcontroller. Comes with Nu-Link-Me, USB programmer and debugger. USB mini B receptor for USB device development. Pre-mounted with 12MHz crystal(MCU system clock) and 32.768KHz crystal (real time clock). Operating Voltage: 5V
Product: MICROCHIP XPRO EXTENSION BOARD WITH BLE 3.3V LDO for power regulation SPI flash for storing firmware images (DFU OTA) Switch for BM71 operation mode Switch to turn all LEDs off for current measurement Switch for GPIO control
Product: MICROCHIP Expansion Kit, Xplained Pro, Bosch BNO055 Intelligent 9-Axis Absolute Orientation Sensor Compatible with the Xplained Pro extension headers I2C interface to BNO055 One RGB LED
Product: MICROCHIP Expansion Board, PROTO1 Xplained Pro, Connects to Expansion Headers on Xplained Pro MCU Board Breadboard compatibility: May have breadboard-compatible headers for connecting wires and components Peripheral interfaces: May include additional interfaces such as UART, I2C, and SPI On-board components: May include LEDs, buttons, and other components for testing and debugging
SAMA5D44 Cortex-A5 Microprocessor 512MBytes DDR2 memory 512MBytes NAND Flash memory 1 EEPROM with a unique MAC address and serial number LCD connectors 10/100 Ethernet MAC with PHY and connector
Product: MICROCHIP ATSAMD21-XPRO Evaluation Kit Digital input and output Two mechanical buttons (user and reset button) One user LED and three possible power sources
16/32-bit ARM7TDMI-S microcontroller in a tiny LQFP64 package. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory. 128-bit wide interface/accelerator enables high speed of 60 MHz operations. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or full chip erase in 400 ms and programming of 256 bytes in 1…
EMW3166 Wi-Fi module with 256K SRAM，1M+2M Byte SPI Flash DAP Link emulator Micro USB 3.3V DC-DC, maximum current 1.5A Codec, with microphone and earphone socket
ARM Cortex M4F (with HW floating point acceleration) running at 64MHz 1MB flash and 256KB SRAM Native Open Source USB stack??? pre-programmed with UF2 bootloader Bluetooth Low Energy compatible 2.4GHz radio FCC / IC / TELEC certified module
ATSAMD21G18 @ 48MHz with 3.3V logic/power 256KB of FLASH + 32KB of RAM 32.768 KHz crystal for clock generation & RTC 3.3V regulator with 500mA peak current output Comes with a USB bootloader and serial port debugging
ATSAMD21G18 @ 48MHz with 3.3V logic/power 256KB of FLASH + 32KB of RAM 3.3V regulator with 500mA peak current output USB bootloader and serial port debugging Built-in 100mA lipoly charger with charging status indicator LED
ATSAMD21G18 @ 48MHz with 3.3V logic/power 256KB of FLASH + 32KB of RAM 3.3V regulator with 500mA peak current output USB bootloader and serial port debugging Built-in 100mA lipoly charger with charging status indicator LED
"🎉 Enjoy exclusive discounts! Use coupon codes at checkout & get FREE delivery on eligible orders. Shop now! 🚚✨" Dismiss
