ATSAMD21G18 @ 48MHz with 3.3V logic/power 256KB of FLASH + 32KB of RAM 3.3V regulator with 500mA peak current output USB bootloader and serial port debugging Built-in 100mA lipoly charger with charging status indicator LED
ATSAMD21G18 @ 48MHz with 3.3V logic/power 256KB of FLASH + 32KB of RAM 3.3V regulator with 500mA peak current output USB bootloader and serial port debugging Built-in 100mA lipoly charger with charging status indicator LED
ATSAMD21G18 @ 48MHz with 3.3V logic/power 256KB of FLASH + 32KB of RAM 32.768 KHz crystal for clock generation & RTC 3.3V regulator with 500mA peak current output Comes with a USB bootloader and serial port debugging
ARM Cortex M4F (with HW floating point acceleration) running at 64MHz 1MB flash and 256KB SRAM Native Open Source USB stack??? pre-programmed with UF2 bootloader Bluetooth Low Energy compatible 2.4GHz radio FCC / IC / TELEC certified module
EMW3166 Wi-Fi module with 256K SRAM,1M+2M Byte SPI Flash DAP Link emulator Micro USB 3.3V DC-DC, maximum current 1.5A Codec, with microphone and earphone socket
16/32-bit ARM7TDMI-S microcontroller in a tiny LQFP64 package. 8 to 40 kB of on-chip static RAM and 32 to 512 kB of on-chip flash program memory. 128-bit wide interface/accelerator enables high speed of 60 MHz operations. In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software. Single flash sector or full chip erase in 400 ms and programming of 256 bytes in 1…
Product: MICROCHIP ATSAMD21-XPRO Evaluation Kit Digital input and output Two mechanical buttons (user and reset button) One user LED and three possible power sources
SAMA5D44 Cortex-A5 Microprocessor 512MBytes DDR2 memory 512MBytes NAND Flash memory 1 EEPROM with a unique MAC address and serial number LCD connectors 10/100 Ethernet MAC with PHY and connector
Product: MICROCHIP Expansion Board, PROTO1 Xplained Pro, Connects to Expansion Headers on Xplained Pro MCU Board Breadboard compatibility: May have breadboard-compatible headers for connecting wires and components Peripheral interfaces: May include additional interfaces such as UART, I2C, and SPI On-board components: May include LEDs, buttons, and other components for testing and debugging
Product: MICROCHIP Expansion Kit, Xplained Pro, Bosch BNO055 Intelligent 9-Axis Absolute Orientation Sensor Compatible with the Xplained Pro extension headers I2C interface to BNO055 One RGB LED
Product: MICROCHIP XPRO EXTENSION BOARD WITH BLE 3.3V LDO for power regulation SPI flash for storing firmware images (DFU OTA) Switch for BM71 operation mode Switch to turn all LEDs off for current measurement Switch for GPIO control
32-bit ARM Cortex-M0 microcontroller from Nuvoton. Premounted with NUC140VE3CN as the target microcontroller. Comes with Nu-Link-Me, USB programmer and debugger. USB mini B receptor for USB device development. Pre-mounted with 12MHz crystal(MCU system clock) and 32.768KHz crystal (real time clock). Operating Voltage: 5V
Model: NXP Development Board, LPC11U68 MCU Single power supply (2.4 V to 3.6 V). Separate VBAT supply for RTC. Operating temperature range: 40 ?C to 105 ?C Memory: ?Up to 256 KB on-chip flash programming memory with page erase and Up to 32 KB main SRAM.
Product: NXP LPC55S69-EVK Development Board, LPCXpresso55S69 Hardware support for external debug probe NXP MMA8652FCR1 accelerometer and stereo audio codec with a line in/out Mikro Eletronika clicked the expansion option