ATmega328p @ 8MHz with 3.3V logic/power 3.3V regulator with 500mA peak current output USB serial converter (CP2104) USB bootloader and serial port debugging Hardware I2C, hardware SPI support
High Performance, Low Power AVR? 8-Bit Microcontroller Non-volatile Program and Data Memories 512 Bytes In-System Programmable EEPROM 512 Bytes Internal SRAM USI ? Universal Serial Interface (12C, SPI, 1-wire) with Start Condition Detector 10-bit ADC 4 Single Ended Channels Two Differential ADC Channel Pairs with Programmable Gain (1x, 20x) Low Power Consumption Active Mode:1 MHz, 1.8V: 300 ?A
Product: MICROCHIP DM080104 AVR Embedded Daughter Board AND Modules Controlled by the same ATtiny1617 MCU 5×6 Surface diamond pattern with dedicated driven shield LEDs to indicate position and mode MCP23017 LED driver
Product: MICROCHIP? ATTINY817-XPRO? Evaluation Kit, ATtiny817 MCU, Embedded Debugger, Microchip Studio Support Two mechanical user buttons Two QTouch? buttons ?One yellow user LED ?32.768 kHz crystal
Product: MICROCHIP? DM164151? Evaluation Kit, Curiosity Nano, AVR128D MCU, 8-Bit One yellow user LED, one mechanical user switch One 32.768KHz crystal Board identification in Atmel Studio/Microchip MPLAB? X IDE One green power and status LED
Microcontroller: ATMEGA2560 with 16 MHz crystal with On-Board USBASP Programmer. Power: 7 to 15 VDC with Reverse Polarity Protection. 2.4GHz ZigBee (XBee) wireless module adaptor 2×16 Character Alphanumeric LCD. SD card Holder. CH340G USB to Serial converter. ESP8255 Adaptor interface with USB to Serial Converter.
