Model: Adafruit Assembled Data Logging shield SD card interface: FAT16 or FAT32 Onboard regulator: 3.3 V Real time clock (RTC) keeps the time going even when the Arduino is unplugged
Implements CAN V2.0B speed up to?1 Mb/s SPI Interface speeds up to 10 MHz Standard (11 bit) and extended (29 bit) data and remote frames Two receive buffers with prioritized message storage Industrial standard DB-9 connector
Latest Arduino CNC Shield Version 3.10 GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) Coolant enable Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping ) Compact design. 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z…
8bits colors support with 6bits correction for each color in every dots Hardware 16MHz PWM support 24 constant current channels of 100mA each Current Consumption(Except LED matrix): 20mA typical (40mA maximum) Drive current(Every channel):?500mA Drive current(Every dot) :?58mA
Onboard high-quality MP3 decoder. Onboard dual channel/Stereo 3W differential audio amplifier for an external speaker. A MicroSD status LED. Onboard stereo 3.5mm audio jack socket for earphones. Onboard microSD socket for MP3 audio files storage. The interface from Arduino, UART, selectable to use soft serial. Stackable side headers. Supply voltage: 5V.
SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card. Real-time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years. Included libraries and example code for both SD and RTC mean you can get going quickly Prototyping area for soldering connectors,…
Compatible with Arduino NANO All digital and analog pins breakout Compact size. Leads all pins out, convenient for wiring, and doing experiments. Dimensions: 53 x 36 x 12 (LxWxH) mm. Weight: 22 gm.
32-bit RISC architecture The processor can operate at 80MHz / 160MHz 32MB flash memory 64kB for instructions 96kB for data Standard native WiFi 802.11b / g / n Operates in AP, Station or AP + Station mode
Pin compatible with Adafruit Motor Shield Pin header to connect sensors and actuators. 4 H-Bridges L293D chipset. Surg Current Protection for IC L293D. Onboard On/Off Switch. Drive? 4 bi-directional DC motors Drive 2 Servo motors (unipolar or bipolar) On-board slot to connect HC-05/HC-06 Bluetooth modules for Wireless control via Smartphone
2-Axis joystick Bluetooth / Serial interface I2C interface nRF24L01 interface Nokia 5110 LCD interface Interface connector Power switch to switch between 3.3 and 5V
2 connections for 5V ?hobby? servos connected to the Arduino?s high-resolution dedicated timer 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution) Up to 2 stepper motors (unipolar or…
L298P based Arduino motor driver shield Onboard Buzzer (D4). Onboard Bluetooth interface, you can directly plug, no wiring required. Six Analog interface. Forward, Backward steering indicators
