Bright Red LED chip, which is made from AlGaAs on GaAs substrate Blackface and RED LED segments Type: Common cathode No. of Pins: 18 Low Current Consumption High Brightness
Bright 2R3Y4G1B LED chip, which is made from AlGaAs on GaAs substrate Blackface and 2R3Y4G1B LED segments Type: Common cathode No. of Pins: 20 Low Current Consumption High Brightness
2.8?? diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on It can control the backlight to connect the transistor to a digital pin 240×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade 4-wire resistive touchscreen 8-bit digital interface, plus 4 control lines
3.2?? diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on It can control the backlight to connect the transistor to a digital pin 240×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade 4-wire resistive touchscreen 8-bit digital interface, plus 4 control lines
7-inch IPS screen with a hardware resolution of 1080×1920.(up to 178? viewing angle) 5-points capacitive touch control, toughened glass panel, 6H hardness. Display interface: Mini HDMI; Touch interface: USB. It uses full lamination and AF anti-fingerprint touch technology, and the use effect becomes better. Supports popular mini PCs such as Raspberry Pi, Jetson Nano.
Bright Blue LED chip, which is made from AlGaAs on GaAs substrate Blackface and BLUE LED segments Type: Common cathode No. of Pins: 20 Low Current Consumption High Brightness
Supply Voltage : 4.5 to 5V DC Operating Current : 220mA 65K RGB colors 85.3mm (L) x 57.6 mm (W) ×11.42? mm (H) 320*240 pixel resolution 300nit Brightness Weigth ?? 44g Interface ?? Serial UART
Bright Green LED chip, which is made from AlGaAs on GaAs substrate Blackface and GREEN LED segments Type: Common cathode No. of Pins: 20 Low Current Consumption High Brightness
Model:?LCD1602 Interface: I2C Interface Address: 0x27 Character Color: White Backlight: Blue Supply voltage: 5V Board Dimensions( L x W x H ) mm: 80 x 36 x 18
Power: 5V Color?Red/Blue(This color means the color of the board, not the LED) This module is compatible with 5V and 3.3V microcontrollers. Material: PCB + Electronic Components
The MAX7219 has integrates a convenient four wire serial interface that can be used to all micro-controller, microprocessor. Each on-chip data can be addressed in the update without rewriting all display, and also allows you to select each data encoding or no-coding.
128 MB of Flash memory 1024 Byte EEPROM XH2.54 4 Pins (+5V, TX, RX, GND) TTL serial interface 1.25T-2-2A Audio port for external speaker connection 8 Digital extended GPIO (IO0-IO7 support input, output, and component binding event, IO6-IO7 support PWM) Built-in RTC support
5-Inch IPS capacitive multi-touch screen. Cryptographic co-processor with secure hardware-based key storage. High-speed expansion interface with a PCIe 1-lane Host, Gen 2 (5Gbps), USB 2.0 port, 28 GPIOs, and PoE. Supports video output at 5K resolution
Operating voltage: 3.3 V to 5.5 V, typical 5 V Operating current: 0.2 mA to 80 mA, typical 27 mA 4 digit numeric display LED color: Red 8 adjustable luminance levels Grove compatible interface
Power Voltage (VCC): 3.3~5.5 V Driver IC: SSD1308Z Display Color: White Dot Matrix: 128×64 Panel Size: 26.7(W)×19.26(H)mm Active Area: 21.74(W)×11.175 (H)mm Dot Pitch: 0.17(W)×0.175 (H)mm Dot Size: 0.15(W)×0.15 (H)mm Wide range of operating temperature:20~70??
264kB of embedded SRAM in six banks Six dedicated IO for SPI Flash (supporting XIP) 30 multifunction GPIO Dedicated hardware for commonly used peripherals
Operating voltage: 3.3V/5V (IO high-level voltage is as same as the power supply.) Communication interface: 4-wire SPI / I2C Screen type: OLED Control chip: SSD1315 Resolution: 128 × 64 Pixels
Operating voltage: 3.3V/5V (IO high-level voltage is as same as the power supply.) Communication interface: 4-wire SPI / I2C Screen type: OLED Control chip: SSD1315 Resolution: 128 × 64 Pixels
Operating voltage: 3.3V/5V (IO high-level voltage is as same as the power supply.) Communication interface: 4-wire SPI / I2C Screen type: OLED Control chip: SSD1315 Resolution: 128 × 64 Pixels
Operating voltage: 3.3V?/ 5V Interface: 3-wire SPI, 4-wire SPI Outline dimension: 42mm × 27mm Display size: 21.76mm × 14mm Dot pitch: 0.175 × 0.17 Resolution: 128 × 80 Display color: black, white No backlight keeps displaying last content for a long time even when power down Ultra-low power consumption, basically power is only required for refreshing SPI control interface, for…
Display?Resolution: 200 x 200 Display Screen Color: Black and White No backlight so keeps displaying last content for a long time even when the power is down Ultra low power consumption, basically power is only required for refreshing SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
Operating voltage: 3.3V/5V Interface: 3-wire SPI, 4-wire SPI Dot pitch: 0.181 × 0.181 No backlight keeps displaying last content for a long time even when power down Ultra-low power consumption, basically power is only required for refreshing SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc.
10.1-inch LCD display. 1200 x 800 screen resolution and IPS display panel. 170? viewing angle Toughened glass capacitive touch panel, 6H hardness. HDMI interface for displaying, USB interface for touch control. Supports 5-level backlight adjustment. Raspberry Pi and Windows device & system support.
LCD Type: TFT Capacitive touch control. Interface: RGB/LVDS Touch controller: FT5406 When works with Raspberry Pi, supports Raspbian, Ubuntu, single touch, and driver free. When work as a computer monitor, supports Windows 10/8.1/8/7/XP, single touch, and driver free. 1024×600 high resolution.
Display Resolution:?212 x 104 Display?Color: Red, Black and White No backlight keeps displaying last content for a long time even when power?is down Ultra low power consumption, basically power is only required for refreshing Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
Use with Jetson nano, support Ubuntu. Resolution: 480×640 Viewing Angle: 160 degree Support backlight control, more power saving. Touch Type: Capacitive
Display?Resolution: 296×128 Display Screen Color: Black and White No backlight so keeps displaying last content for a long time even when the power is down Ultra low power consumption, basically power is only required for refreshing SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
480×800 hardware resolution Provide driver. (support RaspbianUbuntuKali and Retropie system). When only used for display, does not occupy any I/O resources. Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc. Supports HDMI audio output.
3.4-inch IPS round display with a hardware resolution of 800?800. Directly drive LCD via Raspberry Pi?s DSI interface, refresh rate up to 60Hz. IPS Display Panel: Excellent Display Performance With 170? Wide Viewing Angle Up to 10-point touch, depending on the operating system Up to 6H hardness toughened glass panel Optical Bonding, display well and dustproof?for clearer imaging
Model: Waveshare 3.5 inch Capacitive display Resolution: 640 × 480. 5-point capacitive touch Support HDMI audio output. Optional USB Type-C or I2C touch Tempered glass panel, hardness up to 6H
IPS Display Panel: Excellent Display Performance With 170? Wide Viewing Angle Capacitive 5-Point Touch: up to 5-point touch, depending on the operating system Supports backlight control, more power saving. Supports Raspberry Pi OS / Ubuntu and Kali when used with Raspberry Pi. Supports Windows 11 / 10 / 8.1 / 8 / 7 when used as a computer monitor.
4inch IPS screen, 480×800 hardware resolution. Resistive touch control. Compatible and Direct-connect with any revision of Raspberry Pi. Drivers provided (works with your own Raspbian/Ubuntu/Kali/Retropie). Also works as a computer monitor with an HDMI cable. HDMI interface for displaying, no I/Os required. 3.5mm audio jack, supports HDMI audio output.
Display?Resolution: 400×300 Display Screen Color: Black and White No backlight so keeps displaying last content for a long time even when the power is down Ultra low power consumption, basically power is only required for refreshing SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
Power: NFC-powered Resolution: 400×300 Dot pitch: 0x212x 0x212 Refresh time: 4s No backlight required, e-Paper keep displaying the last content for a long time without power No power adapter required
4.3inch IPS Display, 800 × 480 hardware resolution. 5-point capacitive touch, toughed glass panel, hardness up to 6H (this function is only for the touch version). Support Pi4B/3B+/3A+/3B/2B/B+/A+, some CM3/3+/4 expansion board need a?DSI-Cable-15cm. Directly drive the LCD via the DSI port of the Raspberry Pi, and the refreshing rate is up to 60Hz. When working with Raspberry Pi, it…
5-inch LCD display. 800×480 screen resolution and IPS display panel. 170? viewing angle. HDMI interface for displaying. Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch. Raspberry Pi, Windows, Jetson Nano, BB Black, Banana Pi device & system support.
Bright White LED chip, which is made from AlGaAs on GaAs substrate Blackface and WHITE LED segments Type: Common cathode No. of Pins: 20 Low Current Consumption High Brightness
Bright Yellow LED chip, which is made from AlGaAs on GaAs substrate Blackface and YELLOW LED segments Type: Common cathode No. of Pins: 20 Low Current Consumption High Brightness
