Input Voltage: 2.5V~VOUT-0.5V Output Voltage: 5V/8V/9V/12V, default is 12V Output current: 1A(max) The LED indicator can be turned off by the pad next to it Low power consumption
Product: 2-Channel I2C DAC Module Support 3.3V-5V power supply Output voltage error is less than 0.5% Output short-circuit protection Two-channel 0-5V/0-10V output for connecting to and controlling standard analog voltage devices Gravity interface, I2C communication, Arduino control, suitable for program automation control
Sampling rates (kHz): 8/11.025/12/16/22.05/24/32/44.1/48 24 -bit DAC output, support for dynamic range 90dB , SNR support 85dB Fully supports FAT16 , FAT32 file system, maximum support 32G of the TF card, support 32G of U disk, 64M bytes NORFLASH A variety of control modes, I/O control mode, serial mode,?AD button?control mode
VCCA Voltage Range: 1.2V-3.6V VCCB Voltage Range: 1.65V-5.5V Conditions of Use: VCCB>VCCA Working Current: 30uA Support Port: push-pull, open-drain Conversion Speed: push-pull 60Mbps(MAX)open-drain 2Mbps(MAX)
Supply Voltage: 3.3V to 5V Interface: Digital Size: 22x30mm (0.87 x 1.18 in Icons to simply illustrate sensor function High quality connector Immersion gold surface
Power Supply Voltage: 3.3~5V Communication baud rate up to 1M bps Up to 12V-2W power output (output current is about 160mA) Isolation voltage 3000 VDC Bus electrostatic protection capacity is up to 15kV 1/8 unit load, bus load capacity up to 256 nodes
Single-Supply Operation (2.5V to 5.5V) 3.2W Output Power into 4I at 5V 2.4mA Quiescent Current 92% Efficiency (RL = 8I, POUT = 1W) 25?VRMS Output Noise (AV = 15dB)
Power supply voltage(VCC): 2.0, 3, 5.5 V. Output high VOH: 0.8VCC V Output low VOL: 0.3VCC V Response time (touch mode) : 60 mS Response time (low power mode) : 220 mS Can replace the traditional touch of a button Four M2 screws positioning holes for easy installation
Clean, good waveform driving ability, more than 15mA. Working voltage 3.3V-5 Output format: digital switching output (0 and 1) A? fixed bolt holes for easy installation
The DS1302 trickle-charge timekeeping chip module with battery backup contains a real-time clock/calendar and 31 bytes of static RAM. It communicates with a microprocessor via a simple serial interface. The real-time clock/calendar provides seconds,minutes, hours, day, date, month, and year information.
The DS1302 trickle-charge timekeeping chip module with battery backup contains a real-time clock/calendar and 31 bytes of static RAM. It communicates with a microprocessor via a simple serial interface. The real-time clock/calendar provides seconds,minutes, hours, day, date, month, and year information.
