RS422 interface, two-way communication. B Y Z A ultra far transmission 1000 meters The module has ESD 15KV protection. Onboard to increase the limit of 10 ohms current limiting current protection. Module with TVS diode. Anti lightning, peak voltage. The module has 120-ohm termination resistors, which can effectively reduce the interference of long-range communication.
Recommended Input Voltage: 12V Input Voltage Range: 5-15V 2 Pin 2mm SMD JST Right-angle Connector for Input supply On-board TPS62133RGTT Synchronous step down DC-DC converter. Power Status LED (RED) Micro USB for Communication with Android. One start LED connected to boot pin (RC12 =Pin no. 39). User Switch SW1, SW2 connected to any port pin through SW1, SW2 Jumper respectively.
Onboard TJA1050 CAN controller interface chip Chip commonly used pin has led, convenient connection to use Pin 5 v to the power supply PCB board size: 22 (mm) x11.5 (mm) Fully compatible with the ISO 11898 standard High speed (up to 1 Mbaud)
Stably support SignalTap II embedded logic analyzer function, no mistake while crawling data. Fully support all Altera products such as CPLD: MAX3000, MAX7000, MAX9000 and MAXII. FPGA: Stratix, StratixII, StratxIII, Cyclone, CycloneII, CycloneIII, ACEX1K, APEX20K and FLEX10K etc. Active serial configuration device: EPCS1, EPCS4, EPCS16, EPCS64 etc. Enhanced configuration devices: EPC1, EPC4. Supports 3 download mode: AS, PS and JTAG.
Logical light indication: a small light indicate CHO electrical level. Input feature: 5PF,100K Ohm. USB power supply; USB logic analyzer for monitoring, analyzing and debugging digital circuits 8-Channels USB logic analyzer with a 24Mhz sampling frequency Can analyze UART, IIC, and SPI, etc automatically Great for MCU, ARM system and FPGA development Voltage: 0-5.5V
