Original FT232RL and SP485EEN Product type: industrial converter Baudrate: 300-921600bps Host port: USB Device port: ?RS485 USB with the protection of 200mA self-recovery fuse, ESD protection RS485 with the protection of 600W lightning-proof and surge-suppress, 15KV ESD protection Operating system: Mac, Linux, Android, WinCE, Windows 10 / 8.1 / 8 / 7 / XP
ESP-Prog is a development and debugging tool with automatic download firmware, serial communication, JTAG online debugging, and other functions. ESP-Prog is easy to use
Power Supply Voltage: 3.3~5V Communication baud rate up to 1M bps Up to 12V-2W power output (output current is about 160mA) Isolation voltage 3000 VDC Bus electrostatic protection capacity is up to 15kV 1/8 unit load, bus load capacity up to 256 nodes
Standard High-Speed USB 3.2 Gen 1 Data Rate Up To 5gbps USB Output 5v@imax:1.2a, Usb-a Connector USB Hub Input 5v, Switchable Dual Usb-a Connectors External Power Dc Power Supply Terminal 7~36v
5V power supply. Serial I2C control of LCD display using?PCF8574. Backlight can be enabled or disabled via a jumper on the board. Contrast control via a potentiometer. Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
Model RS232/485/422 TO POE ETH (B) Product type Serial server, Modbus gateway, MQTT gateway Primary function RS232/485/422 to Ethernet Communication interface RS232/485/422 × 1, Ethernet port × 1 Power supply Screw terminal DC 6~36V or PoE network port Isolation protection Power isolation, signal isolation protection
4x USB 3.2 Gen1 ports, USB 3.0 / 2.0 / 1.1 compatible Flexible power supply options: powered from either PCIe 12V, OR from 12V DC header Onboard VL805 chip, driver-free, plug and play
Networking: Gigabit Ethernet RJ45 connector × 2 (Original Network port ETH0, and PCIE extended Network port ETH1) , mini?PCIE connector, supports 4G module (USB protocol, can not support PCIE protocol) ,? Nano-SIM card slot supports standard Nano-SIM card for 4G/3G/2G Internet access M.2: Dual NVME Solid State Drives slots (compatible with 2230, 2242, 2260, 2280) USB: USB 3.2 Gen1 (5Gbps)…
Model: M2-PCIe-switch-4p Transfer Interface: PCIe X1 Female Port × 4, M.2 Mkey Male Port × 1 Operating System: Windows / Linux Dimensions: 80.0 × 22.0mm
Cost effective Physical Interface: RS485 Screw Terminal Baudrate: 300~460800bps (self-adaptive) Supported Nodes: Each RS485 port supports up to 32 nodes Communication Distance :1200m (9600bps), the higher rate the shorter distance
Rail-mount RS232 serial server Bi-Directional Transparent Data Transmission Between RS232 And Ethernet Easy To Combine Multi Rail-Mounted Serial Server Together, More Freely Supports TCP Server / TCP Client / UDP Mode / UDP Multicast More Flexible Conversion Between Different Protocols Easy For Cloud Communication And Device Identification
Standard high-speed USB: 2.0 Data rate up to 480mbps USB output 5v@imax:1.2a, USB-a connector External power dc 5v, dc jack/USB-c power input Supported OS: windows, linux. Mac Operating environment -40?? ~ 85??
Based on Qualcomm platform 4G communication module Features RS232, RS485, and TTL port (3.3V/5V) USB Port, support USB dial-up, configuration, AT command, and so on. Hardware watchdog to avoid a crash The fault restart time is configurable. The trigger time and triangle length of UART are configurable. Industrial design, with EMC Working temperature: -40?C ~ 80?C Easy to use
Product Waveshare Industrial Grade Multifunctional USB HUB, Extending 3x USB ports + 100M Ethernet Port USB Port USB 2.0 Port x 3, theoretically up to 480Mbps Networking 10/100 adaptive USB hub Input operating voltage: 5V Connector USB-B
Product Waveshare HDMI 4k Splitter, 1 In 4 Out, Share One HDMI source Data rates 3 Gbps HDMI Ports 1 In 4 Out Compatible HDMI1.4B and DVI 1.0 Supports 4K/2K@30Hz and 4K/2K(YCbCr420)@60Hz resolution
Support Hardwired TCP/IP Protocols: TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE, Ethernet 10BaseT/100BaseTX Ethernet PHY embedded Auto-Negotiation (Full-duplex and half duplex) Support Auto MDI/MDIX Simultaneously Supports to 4 independent sockets 0.18 ?m CMOS technology 3.3V operation with 5V I/O signal tolerance Provide Serial Peripheral Interface (SPI MODE 0, 3) support
Data can be saved as TXT or Excel Supports CAN bus detection for status checking Sending/receiving CAN data with time scale, allows sequentially displaying Baud rate of USB virtual COM port is configurable in the range of 9600 ~ 2000000bps (2000000bps by default) Supports setting working parameters by configuration software or serial command, can be saved after power off Adopts…
Recommended Input Voltage: 12V Input Voltage Range: 5-15V 2 Pin 2mm SMD JST Right-angle Connector for Input supply On-board TPS62133RGTT Synchronous step down DC-DC converter. Power Status LED (RED) Micro USB for Communication with Android. One start LED connected to boot pin (RC12 =Pin no. 39). User Switch SW1, SW2 connected to any port pin through SW1, SW2 Jumper respectively.
Product: 2-Channel I2C DAC Module Support 3.3V-5V power supply Output voltage error is less than 0.5% Output short-circuit protection Two-channel 0-5V/0-10V output for connecting to and controlling standard analog voltage devices Gravity interface, I2C communication, Arduino control, suitable for program automation control
Module type: bidirectional I2C isolator Power supply: from 3 V to 5 V Maximum clock frequency: up to 1 MHz 3-V to 5.5-V supply range -40?C to +125?C operating temperature
"🎉 Enjoy exclusive discounts! Use coupon codes at checkout & get FREE delivery on eligible orders. Shop now! 🚚✨" Dismiss
