Easy for installation Compact & small in size This is a Triple display voltmeter,ammeter & hertz meter Good environmental Protections Very low Power consumption
Easy for installation Compact & small in size This is a 3-in-1 display voltmeter,ammeter ,hertz meter Good environmental Protections Very low Power consumption
Electrical parameter measurement function (voltage, current, active power, energy, frequency, power factor) Overload alarm function (over power alarm threshold, backlight, and power flashing to alarm). Power alarm threshold preset function (can set power alarm threshold). The energy can be reset using the key.
A Simple Temperature Sensor Module with 12V Relay Model: XH-W1401 Thermostat Range: -9? to 99? Thermostat Accuracy: 1? Power Supply: DC12V Output : Electric relay output ,capacity 220V 10A/12V 10A For cooling or heating temperature control
Brand: Mastech DC Voltage utpo 600V (In 5 Ranges) AC Voltage utpo 600V (In 2 Ranges) DC Current up to 10A (In 5 Ranges) Resistance up to 2 M.OHMS (In 5 Ranges) Tests AC/DC Voltage, DC Current and Resistance Transistor Check, Diode and Continuity Test Display Back Light Data Hold Rubber hostler for good grip.
Measuring Range: 0 ~ 100VDC It is a 2-wire display. LED Color: BLUE Current Consumption : < 15 mA. Accuracy: 0.1 V. Refresh Speed : Approx 200mS/time. Measure accurately up to? 3.6 V
Model: TENMA 72-14500 Voltage: 600V Max input current: 400mA LCD display visible area: 38 x 23mm LCD max display count: 4000 Frequency: 45Hz~400Hz (Only for sine wave and triangle wave)
DC Voltage (V) 200mV/2000mV/20V/200V/600V ?(0.5% +2 digit) AC Voltage (V) 200V/600V ?(1.2% +3 digit) DC Current (A) 2000μA/20mA/200mA/10A ?(1% +2 digit) Resistance (Ω) 200Ω/2000Ω/20kΩ/200kΩ/2000kΩ/20MΩ ?(0.8% +5 digit) Temperature (?C) -40?C to 1000?C ?(1% +3 digit)
Electrical parameter measurement function: voltage, current, active power, energy, frequency, power factor Overload alarm function: overpower alarm threshold, backlight, and power flashing to alarm Power alarm threshold preset function: can set power alarm threshold Working voltage: 80-260VAC Test voltage: 80-260VAC Rated power: 10A/2300W
Electrical parameter measurement function: voltage, current, active power, energy, frequency, power factor Overload alarm function: overpower alarm threshold, backlight, and power flashing to alarm Power alarm threshold preset function: can set power alarm threshold Working voltage: 80-260VAC Test voltage: 80-260VAC Rated power: 5A/1100W
AC Voltage: 6V/60V/600V DC Voltage: 600mV/6V/60V/600V Capacitance Temperature NCV Live Wire Test Backlight Flashlight Low Battery Indication Overload Protection Data Hold Autoranging Non Contact Voltage Test Flashlight/Backlight Diode Continuity Frequency measurement
DC Voltage: 400mV/4V/40V/400V/600V ?(0.5%+3) AC Voltage:4V/40V/400V/600V ?(1%+3) Autoranging feature 600 V input voltage protection Auto Power-OFF HOLD function/Back Light Over load indication: ??OL?? symbol displayed when exceeding the measuring range Low battery indication
AC current range: 0.1A to 600A Maximum input voltage: 600V Model D has a 3 and 3/4-digit LCD (3999 counts) Continuity: When the resistance value is less than 50 Ω, the buzzer turns on Autoranging 600 V input voltage protection Auto Power-OFF HOLD function/Back Light Over load indication: ??OL?? symbol displayed when exceeding the measuring range Low battery indication
AC current range: 0.1A to 600A Maximum input voltage: 600V Resistance Range: 200/2k/20k/200k/2M/20M Diode: Open voltage: 1.999 V Autoranging 600 V input voltage protection Auto Power-OFF HOLD function/Back Light Over load indication: ??OL?? symbol displayed when exceeding the measuring range Low battery indication
AC voltage (V): 1000V ?(0.8% +10) DC voltage (V): 1000V ?(0.5% +5) AC current (A): 20A ?(0.8% +10) DC current (A): 20A ?(0.5% +10) Resistance (Ω): 220MΩ ?(0.05% +10) Capacitance (F): 220mF ?(3% +5) Frequency (Hz): 220MHz ?(0.01% +5)
600V AC & 600V DC voltage measurement ACV frequency response: 400-400hz Conduction & resistance measurement Acousto-optic indication (NCV/continuity/battery power) Temperature measurement
Large LCD screen with 6,000 counts display, True RMS measurement, fast ADC digital converter (3 times/s) Extensive range for capacitance measurement, Short response time, e.g. when measuring
Fast and Accurate Non-Contact Laser Measurement Two test modes: rotate speed mode (unit: RPM) & count mode (unit: REV) Wide measure range and high resolution High visible digital LCD and White Backlight display Built-in memory recalls Max-Min and the Last value stored
Material: PCB Color: green Attribute: RF frequency domain analysis tool Interface: USB Power supply: USB Standby current: ??100mA current: ??350mA bandwidth: 33mHz-4400mHz
Power voltage: 100-240 V a.c. 50/60 Hz, 24-48 V a.c. 50/60 Hz or 24-48 V d.c. (Voltage fluctuation rate: ?10%) Power AC: 2-stage setting type: max. 12 VA 1-stage setting type: max. 11 VA Consumption DC: 2-stage setting type: max. 6 W 1-stage setting type: max. 5 W Character height: 6-digit? Counting unit (10.8 mm), Setting unit (8 mm), 4-digit…
Supply voltage: 5V. Interface to the power supply: Mini USB or Φ5.5 DC Socket. Display: 1602 LCD. Effective display digits: 4 digits. LC Resonance measurement method of?capacitance, Inductance and Large Inductance. Charge-discharge method of measurement?of large capacitance.
DDS Technology and FPGA Design Frequency Range: 0. 1Hz ~ 3MHz High Frequency Accuracy: 20ppm High Frequency Stability: 20ppm Max. Frequency Resolution: 100 MHz Low Distortion Sine Wave : -55dBc, Voltage Display ( Only SFG-1013)
Frequency Range: 150kHz ?? 3GHz Autoset Function RBW Range: 30kHz, 100kHz, 300kHz, 1MHz ACPR/CHPW/OCBW Measurement 3 traces in different colors Split Window Function Limit Line Function Remote Control Software
Maximum Voltage:600 V Display :Digital- 6,000 counts, updates 4 per second Battery Type: 9-volt Alkaline, IEC 6LR61 Battery life: 400 hours typical, without backlight Operating temperature:-10?? to + 50?? Easy one-handed operation of the meter Min/Max/Average to record signal fluctuations
Brand: Extech Model Number: EX360 True RMS for accurate AC measurements LoZ prevents false readings caused by ghost voltages Built-in Non-contact AC Voltage Detector (NCV) with LED indicator 6000 count auto-ranging multimeter measures AC/DC voltage and current and resistance Cat IIII ?? 600V UL listed Smart Data Hold freezes the reading on the display and automatically updates the reading and…
Brand: Extech Model Number: EX330 Built-in non-contact AC voltage detector (NCV) 4000 count auto-ranging multimeter measures AC/DC voltage and current and resistance Cat III ?? 600V UL listed ?Built-in Thermometer with a Type K probe Rubber holster protects meter
Brand: Extech Model Number: EX310 Built-in non-contact AC voltage detector (NCV) 2000 count manually ranging multimeter measures AC/DC voltage and current and resistance Cat III ?? 600V UL listed Batter test function (1.5V and 9V) Rubber holster protects meter
Brand: Extech Model Number: 480172 Allows clamp meter to measure AC current on a 2 wire or 3 wire power cord Provides easy and safe measurements of current without the need to cut off the plug and separate the conductors
Display ?3-1/2 Digit LCD display with 2000 display counts Battery ?9V Battery (6F22 or 1604A Type) Operating temperature and Humidity ?0 to +40?C (+32?F to +104?F) and
Receiver Size: Approx. 23.5 x 3.5 cm Emitter Size: Approx. 14.5 x 3.5 cm Power Supply: 2 x 9V Batteries Frequency Signal: 1.5kHz Receive Frequency Range: 100-300kHZ Material: Plastic
AC current range: 0.1A to 600A DC current range: 0.1A to 600A Auto-range mode Low battery indicator Hold Function / backlight and flashlight Overload protection Auto power off after 15 mins Over range display Comes with a storage bag
AC current range: 0.1A to 600A DC voltage range: 0.001V to 600V Auto-range mode Low battery indicator Hold Function / backlight and flashlight Overload protection Auto power off after 15 mins Over range display
Voltage measurement range: DC 00.0-99.9V Current measurement range: DC 0.00-9.99A Power measurement range: 00.00-99.99W-999.9W Energy measurement range: 0-9999.9Wh
Operating Voltage: 4.5-30 VDC It is a 2-wire display. LED Color: RED Current Consumption : < 15 mA. Accuracy: 0.1 V. Refresh Speed : Approx 200mS/time. Measure accurately up to? 3.6 V
Measuring Range: 0-100 VDC It is a 3-wire display. LED Color: GREEN Current Consumption : < 10 mA. Accuracy: 0.1 V. Refresh Speed : Approx 200mS/time. Measure accurately up to? 3.6 V
"🎉 Enjoy exclusive discounts! Use coupon codes at checkout & get FREE delivery on eligible orders. Shop now! 🚚✨" Dismiss