Product: 2-Channel I2C DAC Module Support 3.3V-5V power supply Output voltage error is less than 0.5% Output short-circuit protection Two-channel 0-5V/0-10V output for connecting to and controlling standard analog voltage devices Gravity interface, I2C communication, Arduino control, suitable for program automation control
This DC-DC Step-Down Buck Converter Power Supply Module?provide all the active functions for a step-down (buck) switching regulator, capable of driving a load up to 5A with excellent line and load regulation Simple High-Efficiency Step-Down (Buck) Regulator Mostly used for On-Card Switching Regulators
Input Voltage: 12V Connector: 5.5mm DC Jack Output power on/off switch Two-row multiple pin outputs, easy to use and connect Outputs 3.3V DC at 800mA maximum current 5.0V DC at 800mA maximum current 12V DC (the 12V output is directly connected to the input, i.e. with 12VDC input, this output will be 12VDC; with 9VDC input, this output will be…
Working Voltage: DC 5.3V-32V Output Voltage: DC 1.2V-32V Output Current: 12A (12A need a heat sink, 8A is stable for long time) Output Power: 160W(160W need heat sink, 120W is for 8A) Voltage Display Range: 0 -32V Voltage Display Precision: ?0.5V Voltage Display Resolution: 0.05V Current Display Range: 0 -12A Current Display Precision: ?0.3A Voltage Display Resolution: 0.01A Conversion efficiency:…
Receiver Size: Approx. 23.5 x 3.5 cm Emitter Size: Approx. 14.5 x 3.5 cm Power Supply: 2 x 9V Batteries Frequency Signal: 1.5kHz Receive Frequency Range: 100-300kHZ Material: Plastic
Module type: bidirectional I2C isolator Power supply: from 3 V to 5 V Maximum clock frequency: up to 1 MHz 3-V to 5.5-V supply range -40?C to +125?C operating temperature
Operating Voltage: 5V DC Operating Current: ~600mA (~8.3?) Product Type ?? Electric Heating Pad Size: 14 cm x 5 cm Brand ?? Adafruit Quantity: 1 Heat Output: 2.5W
2 sine wave and 2 square wave output. AD9850: 0-40MHz. After the 20-30MHz frequency harmonics increases, the waveform will be less and less clean. Low-pass filter with 70MHz, so the waveform better than SN. Parallel and serial data input can be selected via a jumper.
AC current range: 0.1A to 600A DC current range: 0.1A to 600A Auto-range mode Low battery indicator Hold Function / backlight and flashlight Overload protection Auto power off after 15 mins Over range display Comes with a storage bag
AC current range: 0.1A to 600A DC voltage range: 0.001V to 600V Auto-range mode Low battery indicator Hold Function / backlight and flashlight Overload protection Auto power off after 15 mins Over range display
