Input Voltage: DC3.6V-6V Input Current: 2A-5A Output Voltage: DC 400KV (Please pay attention to safety when used) Input Line Length: about 100mm (red is positive) Output Line Length: about 160mm
Module Operating Voltage: 5VDC Onboard Bluetooth status indicator and relay indicator With 2 optocoupler isolation, strong anti-interference ability Onboard N76E003/STM8S003 and SPP-C Bluetooth 2.1 module Effective control distance(on open area): 10m On-board 5V, 10 A / 250 v AC 10 A / 30 v DC relay, absorb 100000 times continuously.
Compatible with connector size: 5.5?2.1 mm. Weight: 2 gm Power output interface: 2 VCC, 2-way GND Reliable and safe connection Size: 26?12?13(L?W?H) mm Hole Diameter: 6.5mm Pin Diameter: 2.1mm It has wide use for safe and reliable connection between various Application and power sources
Maximum Output Current: 3A MAX Conversion efficiency: can up to 97.5% Switch frequency: 500KHz Output Ripple: 10mV around (12V to 5V3A) 20M bandwidth Output indicator: Output voltage indicator is red Operating temperature: Industrial grade (-40 ? to + 85 ?) Output overvoltage protection: Yes, input 1.5A fuse, output 5V have 300W TVS tube clamp protection. Flat copper inductor, improve conversion…
Working Voltage: DC 5.3V-32V Output Voltage: DC 1.2V-32V Output Current: 12A (12A need a heat sink, 8A is stable for long time) Output Power: 160W(160W need heat sink, 120W is for 8A) Voltage Display Range: 0 -32V Voltage Display Precision: ?0.5V Voltage Display Resolution: 0.05V Current Display Range: 0 -12A Current Display Precision: ?0.3A Voltage Display Resolution: 0.01A Conversion efficiency:…
Input Voltage: 12V Connector: 5.5mm DC Jack Output power on/off switch Two-row multiple pin outputs, easy to use and connect Outputs 3.3V DC at 800mA maximum current 5.0V DC at 800mA maximum current 12V DC (the 12V output is directly connected to the input, i.e. with 12VDC input, this output will be 12VDC; with 9VDC input, this output will be…
Max Output Current:12 V Maximum Output Current: 3A Conversion efficiency: can up to 97.5% Switch frequency: 500KHz Operating temperature: Industrial grade (-40 ? to + 85 ?) Improve conversion efficiency
Input voltage: DC 4.5 ~ 40V. Output voltage: 5V (when the input voltage is between 6.5V ~ 40V). Output current: 2A. The voltmeter has an automatic calibration function. With reverse connection protection. With overheat protection and short circuit protection.
This DC-DC Step-Down Buck Converter Power Supply Module?provide all the active functions for a step-down (buck) switching regulator, capable of driving a load up to 5A with excellent line and load regulation Simple High-Efficiency Step-Down (Buck) Regulator Mostly used for On-Card Switching Regulators
Input Voltage: 2.5V~VOUT-0.5V Output Voltage: 5V/8V/9V/12V, default is 12V Output current: 1A(max) The LED indicator can be turned off by the pad next to it Low power consumption
Product: 2-Channel I2C DAC Module Support 3.3V-5V power supply Output voltage error is less than 0.5% Output short-circuit protection Two-channel 0-5V/0-10V output for connecting to and controlling standard analog voltage devices Gravity interface, I2C communication, Arduino control, suitable for program automation control
Sampling rates (kHz): 8/11.025/12/16/22.05/24/32/44.1/48 24 -bit DAC output, support for dynamic range 90dB , SNR support 85dB Fully supports FAT16 , FAT32 file system, maximum support 32G of the TF card, support 32G of U disk, 64M bytes NORFLASH A variety of control modes, I/O control mode, serial mode,?AD button?control mode
VCCA Voltage Range: 1.2V-3.6V VCCB Voltage Range: 1.65V-5.5V Conditions of Use: VCCB>VCCA Working Current: 30uA Support Port: push-pull, open-drain Conversion Speed: push-pull 60Mbps(MAX)open-drain 2Mbps(MAX)