Capable of accepting all worldwide Coins and Tokens. Intelligent CPU software control, and high accuracy . Self-programming without PC. Accept 1-3 different kind of coins at the same time. Free to set up pulses' output. Prevent not only electric shock but also electromagnetic interference. Automatic self-test for problems. Free to set up the value for working. (APmode)
Serial Data Interface: Uart, Spi, I2c. Configuration Method: API Or At Commands, Local Or Over-the-air. Frequency Band: ISM 2.4 GHz. Form Factor: Micro, Through-hole, Surface Mount. Interference: Immunity Dsss (Direct Sequence Spread Spectrum). Adc Inputs: (4) 10-bit Adc Inputs. Digital I/o: 15.
168 dB maximum link budget. +20 dBm – 100 mW constant RF output vs. +14 dBm high-efficiency PA. Programmable bit rate up to 300 kbps. High sensitivity: down to -148 dBm. Bullet-proof front end: IIP3 = -12.5 dBm.
ENC28J60 Ethernet Module HanRun HR911105A Ethernet port 5V supply voltage 100% Genuine ENC28J60 Chipset, compatible with Arduino etc. 25MHz Crystal. Standard HanRun HR911105A Ethernet Interface.
The smallest 802.11b/g/n Wi-Fi SOC module Up to 160MHz clock speed Built-in 10 bit high precision ADC Supports UART/GPIO/IIC/PWM/ADC Integrated Wi-Fi MAC/BB/RF/PA/LNA
802.11 b/g/n Standards Wi-Fi Direct (P2P), soft-AP 1MB Flash Memory Integrated low power 32-bit CPU could be used as an application processor A-MPDU & A-MSDU aggregation & 0.4ms guard interval Wake up and transmit packets in < 2ms Standby power consumption of < 1.0mW (DTIM3)
Communication interface voltage: 3.3V Working current: 240mA(MAX) Serial port baud rate: 115200 (default), can be modified to other values by AT command Serial communication format: 8N1 Wireless Network Mode: station / softAP / SoftAP + station Wireless criteria: 802.11 b / g / n WIFI @ 2.4 GHz, support for WPA / WPA2 security mode +19.5dBm output power
Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled Arduino-like hardware IO Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLL, regulators, DCXO and power management units Onboard USB to serial chip to easily program and upload codes from the Arduino IDE Embeds logic level converter circuits Has onboard 3.3V regulator to ensure enough power to function…
This GPS/GLONASS GNSS Antenna is designed for applications which require high positioning accuracy by combining signals from GPS, GLONASS, systems. The tiny size of this antenna allows it to be used in very space restricted environments.
Bluetooth protocol: Bluetooth Specification v2.0+EDR. Frequency: 2.4GHz ISM band. Modulation: GFSK(Gaussian Frequency Shift Keying). Emission power: =4dBm, Class 2. Sensitivity: =-84dBm at 0.1% BER. UART interface and with baud rate setup function
Bluetooth protocol: Bluetooth Specification v2.0+EDR Frequency: 2.4GHz ISM band Modulation: GFSK(Gaussian Frequency Shift Keying) Emission power: ≤4dBm, Class 2 Sensitivity: ≤-84dBm at 0.1% BERCSR Bluetooth Chip Solution Enhanced Data Rate (EDR) compliant with V2.0.E.2 of the specification for both 2Mbps and 3Mbps modulation modes Full Speed Bluetooth Operation with Full Piconet Support and Scatternet Support Incredible small size with 3.3V…
Input Supply voltage (VDC) 3.6 ~ 6 Input current (mA) 50 Maximum Operating Range Distance 10 Meters Operating Frequency 2.4GHz ISM band Modulation GFSK (Gaussian Frequency Shift Keying) Emission power 4dBm, Class 2 Sensitivity -84dBm at 0.1% BER Operating Temperature (℃) -20 ~ 75
Bases at CSR BC04 Bluetooth technology. with build-in 2.4GHz PCB antenna It’s at the Bluetooth class 2 power level. Range test: 10 meters Operating voltage: 3.3V to 6V DC Operating current in pairing is in the range of 30~40mA.
433MHz operation Ultra-low power consumption (3.5mA or 22mA depending on mode) with sleep option (80μA). 10dBm output power and high sensitivity providing long range in the open environment. 3V-6V operating voltage. Serial pass-through mode to replace the serial cable (half duplex). IO pass-through modes.
Operating Frequency Range: 433.4—473.0MHz Transmit Power Max: 20dBm Power Supply Voltage: DC 3.2V ~5.5V Long Communication Distance: About 1000 meters at the default setting
Bluetooth Protocol: Bluetooth Specification V4.0 BLE USB Protocol: USB V2.0 Operating Frequency: 2.4GHz ISM band Modulation Mode: GFSK (Gaussian Frequency Shift Keying) Transmitting Power: ≤4dBm Sensitivity: ≤-84dBm at 0.1% BER It’s easy to use and completely encapsulated. You can set it as slave or master. You can use AT command set the baud rate.
