The Raspberry Pi Zero Case has been designed to fit both the?Pi Zero?and the?Pi Zero W and Raspberry pi Zero 2W. The case consists of two parts. It has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids i.e a Plain Lid, a GPIO Lid, and a Camera Lid.
Good Quality material 96-230Vac operating input range 50,000 hours MTBF 6-month warranty. Input Current: 0.5A maximum Input Power consumption (no load): 0.075W maximum USB-C connection goes straight into your Raspberry Pi
Good Quality material 96-230Vac operating input range 50,000 hours MTBF 6-month warranty. Input Current: 0.5A maximum Input Power consumption (no load): 0.075W maximum USB-C connection goes straight into your?Raspberry Pi
Raspberry Pi Camera, supports all revisions of the Pi Embedded IR-CUT filter, eliminating colour distortion in the daylight Comes with infrared LED, supports night vision 5-megapixel OV5647 sensor Can Attach IR LEDs if Night Vision mode is required
Two changeover relays Four tactile switches Eight digital inputs Eight open collector outputs 8 onboard LEDs for indicating the status of an application, debugging circuits and codes Graphical emulator
Based on MAX30101 ?? heart rate, oximeter, smoke sensor Green, red, and infra-red LEDs Interface: I2C (address 0x57) Compatible with 3.3V and 5V logic levels.
PCM5100A I2S DAC 3.5mm stereo headphone jack connector 3.5mm stereo line out jack connector Assembled Pico Audio Out Dimensions: 53mm x 29mm x 11mm (L x W x H, including headers and audio jacks)
Power over Ethernet (PoE) 802.3af Compliant Fully Isolated Switched-Mode Power Supply (SMPS) Input Voltage: 36V ?? 56V Output Voltage: 5V Output Current: Up to 2.5A Integrated Fan Control and 25mm x 25mm Brushless Fan Plug-and-Play Compatibility with Raspberry Pi 3 Model B+
Compatible for All variants of the Raspberry pi 3 Model B Easy to assemble and highly durable material Uses: For Raspberry Pi surveillance camera shell The horizontal angles are 360 degrees and 90 degrees, showing a large view of the camera.
Snug and secure fit protect your Pi while looking great! Anti-slip feet keep your Raspberry Pi stable Power and activity lights still visible through the end of the case Dimensions: 98 x 72 x 26 (LxWxH) mm.
Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE Extended 40-pin GPIO header Full-size HDMI Single USB 2.0 ports CSI camera port for connecting a Raspberry Pi Camera Module DSI display port for connecting a Raspberry Pi Touch Display 4-pole stereo output and composite video port
₹7,499Original price was: ₹7,499.₹3,599Current price is: ₹3,599.
Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz 1GB LPDDR2 SDRAM 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE Gigabit Ethernet over USB 2.0 (maximum throughput of 300 Mbps) Extended 40-pin GPIO header, Full-size HDMI 4 USB 2.0 ports CSI camera port, DSI display port for connecting a Raspberry Pi touchscreen display 4-pole stereo output and composite video…
Reduces the risk of hardware failure due to overheating Low profile, will fit into most cases. Simple, Passive cooling. No need for noisy fans. Perfectly sized for the RPi?s CPU
Only 3-piece ABS case with access to all Ports on pi 4 Compatible for All variants of the Raspberry pi 4 Model B Easy to assemble and highly durable material Slots to route GPIO and CSI ribbon cable Cut-out for micro SC card at the bottom panel locking screw holes and anti-slip rubber feet at the back.