Fixed focus lens on-board Improved resolution -8-Megapixel native resolution sensor-capable of 3280 x 2464 pixel static images Supports 1080p30, 720p60 and 640x480p90 video Size 25mm x 23mm x 9mm Weight just over 3g Connects to the Raspberry Pi board via a short ribbon cable (supplied) Camera v2 is supported in the latest version of Raspbian, Raspberry Pi’s preferred operating system…
All-in-one USB-to-serial debug and UART bridge Both interfaces use a 3-pin debug connector Open-source Raspberry Pi Picoprobe software Three different types of debug cables to cover the vast use cases plug and play debugging of Raspberry Pi Pico and other microcontrollers- and microprocessor-based platforms.
Memory Size: 32 Gigabyte Card Type: Micro SD Speed: up to 98MB/s Class: 10 High-speed Card can be used for both Mobile phone and Raspberry Pi 5 years of manufacturing defect Warranty Given by Sandisk.
RP2040 microcontroller with 2MByte Flash Dual-core cortex M0+ at up to 133MHz 264kByte multi-bank high-performance SRAM 30 multi-function General Purpose IO (4 can be used for ADC) 1.8-3.3V IO Voltage (NOTE. Pico IO voltage is fixed at 3.3V) 12-bit 500ksps Analogue to Digital Converter (ADC)
4 USB Ports, Compatible with USB2.0/1.1 Onboard USB to UART, with enable/disable switch, convenient for Raspberry Pi serial debugging and avoiding conflict Onboard multi indicators, for monitoring the status of power, USB to UART, and each USB port
Driver-free, plug and play, compatible with OS including Windows, Mac OS, Linux, and Android Purpose-made for Raspberry Pi 4, compatible with other Raspberry Pi versions as well Comes with development resources and manual
LTE Cat-4, 3G, 2G Frequency Bands. LTE Cat-4: Up To 50Mbps (Uplink) / Up To 150Mbps (Downlink). 3G (HSPA+): Up To 5.76Mbps (Uplink) / Up To 42Mbps (Downlink). MP2128DT, MP1482 power chip NAU8810 audio decoder TXS0108EPWR voltage translator Satellite Bands: GPS/Beidou/GLONASS. Supports echo cancellation, noise reduction.
Operating voltage: 3.3V Communication interface: I2C Logic level: 3.3V LSF0204PWR:?4-ch voltage level translator RT9193-18:?1.8V linear regulator RT9193-33:?3.3V linear regulator
MAX705 monitoring circuit with auto-reset function Incorporates DS3231SN high precision RTC chip, with backup battery holder Reset pin selection for switching watchdog
Supports SMS, phone call, GPRS, TCP/IP, DTMF, HTTP, FTPl, etc. UART interface, for connecting controller boards like Arduino/STM32 Onboard voltage translator, 3.3V by default, switch to 5V via jumper 2x LED indicators, easy to monitor the working status SIM card slot, supports 1.8V/3V SIM card
Supports Raspberry Pi 3B+/4B, compatible with the Raspberry Pi official case PoE (Power Over Ethernet) capability, IEEE 802.3af-compliant Fully isolated switched-mode power supply (SMPS) Smaller and more flexible with a more compact component layout
Main Controller? Rp2040 Communication Interface Uart + Gpio Communication Baud Rate 115200bps By Default (Configurable) Power Supply Interface USB Port Or Ph2.0 Connector USB Power Input Voltage 5v
POWER INPUT: 7-36V STORAGE: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants FAN: allows speed adjustment and measurement, 5V / 12V INDICATOR: M.2 status LED CM4: status LED
