Center female pin header for direct attaching the Raspberry Pi Pico. Extra USB connector for external power supply. Immersion Gold Process Black Base Panel, White Pinout Labels, Golden Rounded Outline, Stunning Aesthetic
Encrypted root file system Secure key storage and generation Physical tamper detection ? perimeter breach, accelerometer Measures and authenticates the identity of a host device Supports TLS client certificates and digital signatures Precision Real-Time Clock, battery-backed
RP2040 microcontroller with 2MByte Flash Dual-core cortex M0+ at up to 133MHz 264kByte multi-bank high-performance SRAM 30 multi-function General Purpose IO (4 can be used for ADC) 1.8-3.3V IO Voltage (NOTE. Pico IO voltage is fixed at 3.3V) 12-bit 500ksps Analogue to Digital Converter (ADC)
4 USB Ports, Compatible with USB2.0/1.1 Onboard USB to UART, with enable/disable switch, convenient for Raspberry Pi serial debugging and avoiding conflict Onboard multi indicators, for monitoring the status of power, USB to UART, and each USB port
Driver-free, plug and play, compatible with OS including Windows, Mac OS, Linux, and Android Purpose-made for Raspberry Pi 4, compatible with other Raspberry Pi versions as well Comes with development resources and manual
LTE Cat-4, 3G, 2G Frequency Bands. LTE Cat-4: Up To 50Mbps (Uplink) / Up To 150Mbps (Downlink). 3G (HSPA+): Up To 5.76Mbps (Uplink) / Up To 42Mbps (Downlink). MP2128DT, MP1482 power chip NAU8810 audio decoder TXS0108EPWR voltage translator Satellite Bands: GPS/Beidou/GLONASS. Supports echo cancellation, noise reduction.
Operating voltage: 3.3V Communication interface: I2C Logic level: 3.3V LSF0204PWR:?4-ch voltage level translator RT9193-18:?1.8V linear regulator RT9193-33:?3.3V linear regulator
MAX705 monitoring circuit with auto-reset function Incorporates DS3231SN high precision RTC chip, with backup battery holder Reset pin selection for switching watchdog
Supports SMS, phone call, GPRS, TCP/IP, DTMF, HTTP, FTPl, etc. UART interface, for connecting controller boards like Arduino/STM32 Onboard voltage translator, 3.3V by default, switch to 5V via jumper 2x LED indicators, easy to monitor the working status SIM card slot, supports 1.8V/3V SIM card
Supports Raspberry Pi 3B+/4B, compatible with the Raspberry Pi official case PoE (Power Over Ethernet) capability, IEEE 802.3af-compliant Fully isolated switched-mode power supply (SMPS) Smaller and more flexible with a more compact component layout
Ultra-compact and portable USB flash drive Share your photos, videos, songs, and other files between computers with ease Protect your private files with included SanDisk SecureAccess software Includes added protection of secure online backup (up to 2GB optionally available) offered by YuuWaa Password-protect your sensitive files
Built in High quality Class-D stereo audio amplifier (TI TPA3118D2) AMP can be enabled / disabled via jumper 3.5mm stereo audio jack Built in High quality audio headphone amplifier (TI TPA6133A)
Standard: IEEE 802.3at-2003 PoE Input voltage: 37??57 V DC, Class 4 device Output power: 5 V DC/4 A Integrated Fan Control and 25mm x 25mm Brushless Fan Plug-and-Play Compatibility with Raspberry Pi 3 B+ and Pi 4
HAT compliant accessory; EEPROM, mounting holes Full-HD audio ?? up to 24-bit/192kHz playback Up to 2x35w of crystal clear amplification No soldering required to your Raspberry Pi ound card ?? access to gpio yes Sound card ?? type amp
External power connector (+12V, +5V) 2 x full-size HDMI 2.0 connectors Gigabit Ethernet RJ45 with PoE support Micro USB socket for updating Compute Module 4 PCIe Gen 2 x1 socket Standard fan connector
Variants: Standard Powered autofocus. Sensor: SONY IMX708 Resolution: 12 Megapixel Viewing Angle: 76? Improved low-light sensitivity. Compatible with all models of Raspberry Pi*
PCM5100A I2S DAC 3.5mm stereo headphone jack connector 3.5mm stereo line out jack connector Assembled Pico Audio Out Dimensions: 53mm x 29mm x 11mm (L x W x H, including headers and audio jacks)
Based on MAX30101 ?? heart rate, oximeter, smoke sensor Green, red, and infra-red LEDs Interface: I2C (address 0x57) Compatible with 3.3V and 5V logic levels.
78-key US Layout keyboard Three USB 2.0 type-A ports for powering other peripherals Automatic keyboard language detection USB type A to micro USB type B cable included for connection to a compatible computer Weight: 269g
Simply?replace the bottom?of the Argon ONE Case?with?the expansion board?and the case can now use SSDs. It is?recommended?to use?Raspberry Pi 4 Cases?though due to the?USB 3.0?ports the boards provide. Argon ONE M.2 is UASP Supported for the Raspberry Pi 4?which means you can maximize the transfer speeds of your M.2?NVME Drive. Adds M.2?NVME SSD Compatibility to your?Raspberry Pi 4. Only works…
