Good electrical characteristics Different base materials, sizes, and connections Monitoring electrode with foam tape and radiolucent stud. ECG Electrode with convenient abrader. ECG Electrode for monitoring applications requiring high adhesion. Adhesive foam tape backing and proprietary sticky gel ensure excellent skin contact. Remains fresh for 30 days out of the bag.
The diameter of the Electrode Pad: 52 mm Cable Length: 2 feet Weight: 30gm. Improved adjustable gain (more rugged) Onboard port for our new?cables Connects to the board straight out of the box The reduced voltage needed (+-3.5V)
Power Supply: 3.3V Working Current: ?15mA Communication: I2C/UART I2C Address: 0x57 Operating Temperature Range: -40?~85? Dimension: 18 x 22mm/0.71 x 0.87?
Good electrical characteristics Different base materials, sizes, and connections Monitoring electrode with foam tape and radiolucent stud. ECG Electrode with convenient abrader. ECG Electrode for monitoring applications requiring high adhesion. Adhesive foam tape backing and proprietary sticky gel ensure excellent skin contact. Remains fresh for 30 days out of the bag.
Integrated image collecting and algorithm chip together, ALL-in-One. The fingerprint reader can conduct secondary development, can be embedded into a variety of end products. Low power consumption, low cost, small size, excellent performance. Professional optical technology, precise module manufacturing techniques. Good image processing capabilities can successfully capture an image up to resolution 500 dpi. Comes with Matching mode (1: 1)…
Finger window: 12.9 x 16.9 mm. Image Size: 258 x 202 Pixels. Storage capacity: 200 fingerprints. Wake up on Finger Function. Anti-Scratch with surface high hardness ?? 5H. Resolution: 450 dpi. CPU: ARM Cortex M3 Core MCU).
A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required. The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything. Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting.
Integrated image collecting and algorithm chip together, ALL-in-One. The fingerprint reader can conduct secondary development, can be embedded into a variety of end products. Low power consumption, low cost, small size, excellent performance. Professional optical technology, precise module manufacturing techniques. Good image processing capabilities can successfully capture an image up to resolution 500 dpi. Comes with Matching mode (1: 1)…
Built-in 2KByte storage: support up to 100 fingerprints Powerful self-learning function: the more you use, the more accurate the recognition Selectable security level Small size, low power consumption,10uA for?standby mode
The?Olimex Shield-EKG-EMG-PA passive electrode pack?has three electrodes suitable for use with the EKG/EMG shield (73-0274) labeled right arm, left arm and DRL. DRL stands for Driven Right Leg and it is used to improve common mode rejection.
Processor: ?STM32F205 The commercial fingerprinting algorithm, faster identification High-accuracy optical sensor with a standard 16-pin interface Easy for developing Controlled via UART hence supports any MCU with UART Open protocol
Product: VCNL4020C-GS08 BIOSENSOR Operating Voltage Range (V): 2.5 to 3.6 I2C Bus Voltage Range (V): 1.7 to 5 LED Pulse Current (1) (mA): 10 to 200 Ambient Light Range (lx): 0.25 to 16 383
